Re: [PATCH] dt-bindings: firmware: qcom-scm: convert to dtschema

[Guru Das Srinagesh]

On Thu, Jun 23, 2022 at 08:25:42PM +0200, Robert Marko wrote:
> Convert bindings for Qualcomm SCM to dtschema.
> 
> SoC compatibles that were used, but not documented were added.
> 
> Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
> ---
>  .../devicetree/bindings/firmware/qcom,scm.txt |  57 --------
>  .../bindings/firmware/qcom,scm.yaml           | 124 ++++++++++++++++++
>  2 files changed, 124 insertions(+), 57 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/firmware/qcom,scm.txt
>  create mode 100644 Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
> deleted file mode 100644
> index 0f4e5ab26477..000000000000
> --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
> +++ /dev/null
> @@ -1,57 +0,0 @@
> -QCOM Secure Channel Manager (SCM)
> -
> -Qualcomm processors include an interface to communicate to the secure firmware.
> -This interface allows for clients to request different types of actions.  These
> -can include CPU power up/down, HDCP requests, loading of firmware, and other
> -assorted actions.
> -
> -Required properties:
> -- compatible: must contain one of the following:
> - * "qcom,scm-apq8064"
> - * "qcom,scm-apq8084"
> - * "qcom,scm-ipq4019"
> - * "qcom,scm-ipq806x"
> - * "qcom,scm-ipq8074"
> - * "qcom,scm-mdm9607"
> - * "qcom,scm-msm8226"
> - * "qcom,scm-msm8660"
> - * "qcom,scm-msm8916"
> - * "qcom,scm-msm8953"
> - * "qcom,scm-msm8960"
> - * "qcom,scm-msm8974"
> - * "qcom,scm-msm8976"
> - * "qcom,scm-msm8994"
> - * "qcom,scm-msm8996"
> - * "qcom,scm-msm8998"
> - * "qcom,scm-sc7180"
> - * "qcom,scm-sc7280"
> - * "qcom,scm-sdm845"
> - * "qcom,scm-sdx55"
> - * "qcom,scm-sm6350"
> - * "qcom,scm-sm8150"
> - * "qcom,scm-sm8250"
> - * "qcom,scm-sm8350"
> - * "qcom,scm-sm8450"
> - and:
> - * "qcom,scm"
> -- clocks: Specifies clocks needed by the SCM interface, if any:
> - * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and
> -   "qcom,scm-msm8960"
> - * core, iface and bus clocks required for "qcom,scm-apq8084",
> -   "qcom,scm-msm8916", "qcom,scm-msm8953", "qcom,scm-msm8974" and "qcom,scm-msm8976"
> -- clock-names: Must contain "core" for the core clock, "iface" for the interface
> -  clock and "bus" for the bus clock per the requirements of the compatible.
> -- qcom,dload-mode: phandle to the TCSR hardware block and offset of the
> -		   download mode control register (optional)
> -
> -Example for MSM8916:
> -
> -	firmware {
> -		scm {
> -			compatible = "qcom,msm8916", "qcom,scm";
> -			clocks = <&gcc GCC_CRYPTO_CLK> ,
> -				 <&gcc GCC_CRYPTO_AXI_CLK>,
> -				 <&gcc GCC_CRYPTO_AHB_CLK>;
> -			clock-names = "core", "bus", "iface";
> -		};
> -	};
> diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> new file mode 100644
> index 000000000000..7dd7beb39846
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> @@ -0,0 +1,124 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/firmware/qcom,scm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: QCOM Secure Channel Manager (SCM) bindings
> +
> +maintainers:
> +  - Robert Marko <robimarko@xxxxxxxxx>

I'd like to volunteer my name as well, if that's okay:

Guru Das Srinagesh <quic_gurus@xxxxxxxxxxx>

> +
> +description: |
...
> +
> +  '#reset-cells':
> +    const: 1

This isn't part of the original file - could you please explain why this is
being added?

> +
> +  qcom,dload-mode:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      Phandle to the TCSR hardware block and offset of the download mode control register
> +
> +required:
> +  - compatible
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,scm-apq8064
> +              - qcom,scm-msm8660
> +              - qcom,scm-msm8960
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: SCM core clock
> +        clock-names:
> +          items:
> +            - const: core
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,scm-apq8084
> +              - qcom,scm-mdm9607
> +              - qcom,scm-msm8916
> +              - qcom,scm-msm8953
> +              - qcom,scm-msm8974
> +              - qcom,scm-msm8976
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: SCM core clock
> +            - description: SCM bus clock
> +            - description: SCM interface clock
> +        clock-names:
> +          items:
> +            - const: core
> +            - const: bus
> +            - const: iface

Thanks, I had this YAML conversion patch done locally, but couldn't figure out
how to represent the above logic in YAML. Thank you for this patch.

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
> +    firmware {
> +      scm {
> +        compatible = "qcom,scm-msm8916", "qcom,scm";
> +
> +        clocks = <&gcc GCC_CRYPTO_CLK>,
> +                 <&gcc GCC_CRYPTO_AXI_CLK>,
> +                 <&gcc GCC_CRYPTO_AHB_CLK>;
> +        clock-names = "core", "bus", "iface";
> +        qcom,dload-mode = <&tcsr 0x6100>;
> +      };
> +    };
> -- 
> 2.36.1
>