[PATCH RESEND v2 1/2] bus: bt1-apb: Don't print error on -EPROBE_DEFER

[Serge Semin]

The Baikal-T1 APB bus driver correctly handles the deferred probe
situation, but still pollutes the system log with a misleading error
message. Let's fix that by using the dev_err_probe() method to print the
log message in case of the clocks/resets request errors.

Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>

---

Link: https://lore.kernel.org/lkml/20220610080103.10689-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/
Changelog v2:
- Use the dev_err_probe() return value as the return status of the
  corresponding method. (@Philipp)

Link: https://lore.kernel.org/lkml/20220610104030.28399-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx
Changelog v3:
- Just resend.
- Rebase onto the kernel v5.19-rcX.
---
 drivers/bus/bt1-apb.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/bus/bt1-apb.c b/drivers/bus/bt1-apb.c
index b25ff941e7c7..63b1b4a76671 100644
--- a/drivers/bus/bt1-apb.c
+++ b/drivers/bus/bt1-apb.c
@@ -175,10 +175,9 @@ static int bt1_apb_request_rst(struct bt1_apb *apb)
 	int ret;
 
 	apb->prst = devm_reset_control_get_optional_exclusive(apb->dev, "prst");
-	if (IS_ERR(apb->prst)) {
-		dev_warn(apb->dev, "Couldn't get reset control line\n");
-		return PTR_ERR(apb->prst);
-	}
+	if (IS_ERR(apb->prst))
+		return dev_err_probe(apb->dev, PTR_ERR(apb->prst),
+				     "Couldn't get reset control line\n");
 
 	ret = reset_control_deassert(apb->prst);
 	if (ret)
@@ -199,10 +198,9 @@ static int bt1_apb_request_clk(struct bt1_apb *apb)
 	int ret;
 
 	apb->pclk = devm_clk_get(apb->dev, "pclk");
-	if (IS_ERR(apb->pclk)) {
-		dev_err(apb->dev, "Couldn't get APB clock descriptor\n");
-		return PTR_ERR(apb->pclk);
-	}
+	if (IS_ERR(apb->pclk))
+		return dev_err_probe(apb->dev, PTR_ERR(apb->pclk),
+				     "Couldn't get APB clock descriptor\n");
 
 	ret = clk_prepare_enable(apb->pclk);
 	if (ret) {
-- 
2.35.1