Re: [PATCH net-next v1 1/1] net: phy: ax88772a: fix lost pause advertisement configuration

[Lukas Wunner]

On Fri, Jun 24, 2022 at 09:55:58AM +0200, Oleksij Rempel wrote:
> In case of asix_ax88772a_link_change_notify() workaround, we run soft
> reset which will automatically clear MII_ADVERTISE configuration. The
> PHYlib framework do not know about changed configuration state of the
> PHY, so we need to save and restore all needed configuration registers.
[...]
>  static void asix_ax88772a_link_change_notify(struct phy_device *phydev)
>  {
>  	/* Reset PHY, otherwise MII_LPA will provide outdated information.
>  	 * This issue is reproducible only with some link partner PHYs
>  	 */
> -	if (phydev->state == PHY_NOLINK && phydev->drv->soft_reset)
> +	if (phydev->state == PHY_NOLINK && phydev->drv->soft_reset) {
> +		struct asix_context context;
> +
> +		asix_context_save(phydev, &context);
> +
>  		phydev->drv->soft_reset(phydev);
> +
> +		asix_context_restore(phydev, &context);
> +	}
>  }

Hm, how about just calling phy_init_hw()?  That will perform a
->soft_reset() and also restore the configuration, including
interrupts (which the above does not, but I guess that's
irrelevant as long as the driver uses polling).

Does phy_init_hw() do too much or too little compared to the above
and is hence not a viable solution?

Thanks,

Lukas