[PATCH v3 1/5] pinctrl: mediatek: add generic driving setup property on mt8192

[Guodong Liu]

The dt-binding expects the drive-strength arguments to be passed in mA,
but the driver was using callbacks that expect raw values instead. Change
the callbacks for the ones that operate on mA values, so that the driver
is in accordance to the dt-binding.

The drive-strength property requiring values in mA is the standard and
other MediaTek SoCs of the same generation already do the same, so this
change avoids mt8192 having a non-standard property.

There are no current upstream users of this driver, so this change doesn't
cause any regression.

Signed-off-by: Guodong Liu <guodong.liu@xxxxxxxxxxxx>
---
 drivers/pinctrl/mediatek/pinctrl-mt8192.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8192.c b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
index acccde9262ba..2421a12fc573 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8192.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
@@ -1372,8 +1372,8 @@ static const struct mtk_pin_soc mt8192_data = {
 	.gpio_m = 0,
 	.bias_set_combo = mtk_pinconf_bias_set_combo,
 	.bias_get_combo = mtk_pinconf_bias_get_combo,
-	.drive_set = mtk_pinconf_drive_set_raw,
-	.drive_get = mtk_pinconf_drive_get_raw,
+	.drive_set = mtk_pinconf_drive_set_rev1,
+	.drive_get = mtk_pinconf_drive_get_rev1,
 	.adv_pull_get = mtk_pinconf_adv_pull_get,
 	.adv_pull_set = mtk_pinconf_adv_pull_set,
 	.adv_drive_get = mtk_pinconf_adv_drive_get,
-- 
2.25.5