Re: [PATCH v2 1/9] PM: domains: Delete usage of driver_deferred_probe_check_state()

[Tony Lindgren]

* Saravana Kannan <saravanak@xxxxxxxxxx> [220623 08:17]:
> On Thu, Jun 23, 2022 at 12:01 AM Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> >
> > * Saravana Kannan <saravanak@xxxxxxxxxx> [220622 19:05]:
> > > On Tue, Jun 21, 2022 at 9:59 PM Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> > > > This issue is no directly related fw_devlink. It is a side effect of
> > > > removing driver_deferred_probe_check_state(). We no longer return
> > > > -EPROBE_DEFER at the end of driver_deferred_probe_check_state().
> > >
> > > Yes, I understand the issue. But driver_deferred_probe_check_state()
> > > was deleted because fw_devlink=on should have short circuited the
> > > probe attempt with an  -EPROBE_DEFER before reaching the bus/driver
> > > probe function and hitting this -ENOENT failure. That's why I was
> > > asking the other questions.
> >
> > OK. So where is the -EPROBE_DEFER supposed to happen without
> > driver_deferred_probe_check_state() then?
> 
> device_links_check_suppliers() call inside really_probe() would short
> circuit and return an -EPROBE_DEFER if the device links are created as
> expected.

OK

> > Hmm so I'm not seeing any supplier for the top level ocp device in
> > the booting case without your patches. I see the suppliers for the
> > ocp child device instances only.
> 
> Hmmm... this is strange (that the device link isn't there), but this
> is what I suspected.

Yup, maybe it's because of the supplier being a device in the child
interconnect for the ocp.

> Now we need to figure out why it's missing. There are only a few
> things that could cause this and I don't see any of those. I already
> checked to make sure the power domain in this instance had a proper
> driver with a probe() function -- if it didn't, then that's one thing
> that'd could have caused the missing device link. The device does seem
> to have a proper driver, so looks like I can rule that out.
> 
> Can you point me to the dts file that corresponds to the specific
> board you are testing this one? I probably won't find anything, but I
> want to rule out some of the possibilities.

You can use the beaglebone black dts for example, that's
arch/arm/boot/dts/am335x-boneblack.dts and uses am33xx.dtsi for
ocp interconnect with simple-pm-bus.

> All the device link creation logic is inside drivers/base/core.c. So
> if you can look at the existing messages or add other stuff to figure
> out why the device link isn't getting created, that'd be handy. In
> either case, I'll continue staring at the DT and code to see what
> might be happening here.

In device_links_check_suppliers() I see these ocp suppliers:

platform ocp: device_links_check_suppliers: 1024: supplier 44e00d00.prm: link->status: 0 link->flags: 000001c0
platform ocp: device_links_check_suppliers: 1024: supplier 44e01000.prm: link->status: 0 link->flags: 000001c0
platform ocp: device_links_check_suppliers: 1024: supplier 44e00c00.prm: link->status: 0 link->flags: 000001c0
platform ocp: device_links_check_suppliers: 1024: supplier 44e00e00.prm: link->status: 0 link->flags: 000001c0
platform ocp: device_links_check_suppliers: 1024: supplier 44e01100.prm: link->status: 0 link->flags: 000001c0
platform ocp: device_links_check_suppliers: 1024: supplier fixedregulator0: link->status: 1 link->flags: 000001c0

No -EPROBE_DEFER is returned in device_links_check_suppliers() for
44e00c00.prm supplier for beaglebone black for example, 0 gets
returned.

Regards,

Tony