[PATCH 5.10 030/102] phy: aquantia: Fix AN when higher speeds than 1G are not advertised

From: Greg Kroah-Hartman
Date: Mon Jun 27 2022 - 07:24:26 EST


From: Claudiu Manoil <claudiu.manoil@xxxxxxx>

[ Upstream commit 9b7fd1670a94a57d974795acebde843a5c1a354e ]

Even when the eth port is resticted to work with speeds not higher than 1G,
and so the eth driver is requesting the phy (via phylink) to advertise up
to 1000BASET support, the aquantia phy device is still advertising for 2.5G
and 5G speeds.
Clear these advertising defaults when requested.

Cc: Ondrej Spacek <ondrej.spacek@xxxxxxx>
Fixes: 09c4c57f7bc41 ("net: phy: aquantia: add support for auto-negotiation configuration")
Signed-off-by: Claudiu Manoil <claudiu.manoil@xxxxxxx>
Link: https://lore.kernel.org/r/20220610084037.7625-1-claudiu.manoil@xxxxxxx
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/phy/aquantia_main.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia_main.c
index 41e7c1432497..75a62d1cc737 100644
--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -34,6 +34,8 @@
#define MDIO_AN_VEND_PROV 0xc400
#define MDIO_AN_VEND_PROV_1000BASET_FULL BIT(15)
#define MDIO_AN_VEND_PROV_1000BASET_HALF BIT(14)
+#define MDIO_AN_VEND_PROV_5000BASET_FULL BIT(11)
+#define MDIO_AN_VEND_PROV_2500BASET_FULL BIT(10)
#define MDIO_AN_VEND_PROV_DOWNSHIFT_EN BIT(4)
#define MDIO_AN_VEND_PROV_DOWNSHIFT_MASK GENMASK(3, 0)
#define MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT 4
@@ -230,9 +232,20 @@ static int aqr_config_aneg(struct phy_device *phydev)
phydev->advertising))
reg |= MDIO_AN_VEND_PROV_1000BASET_HALF;

+ /* Handle the case when the 2.5G and 5G speeds are not advertised */
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+ phydev->advertising))
+ reg |= MDIO_AN_VEND_PROV_2500BASET_FULL;
+
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+ phydev->advertising))
+ reg |= MDIO_AN_VEND_PROV_5000BASET_FULL;
+
ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
MDIO_AN_VEND_PROV_1000BASET_HALF |
- MDIO_AN_VEND_PROV_1000BASET_FULL, reg);
+ MDIO_AN_VEND_PROV_1000BASET_FULL |
+ MDIO_AN_VEND_PROV_2500BASET_FULL |
+ MDIO_AN_VEND_PROV_5000BASET_FULL, reg);
if (ret < 0)
return ret;
if (ret > 0)
--
2.35.1