Re: [PATCH 1/4] dt-bindings: usb: typec: add bindings for stm32g0 controller

[Fabrice Gasnier]

On 6/24/22 18:16, Krzysztof Kozlowski wrote:
> On 24/06/2022 17:54, Fabrice Gasnier wrote:
>> This patch adds DT schema documentation for the STM32G0 Type-C controller.
> 
> No "This patch"

Hi Krzysztof,

ack,

> 
> https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95
> 
>> STM32G0 provides an integrated USB Type-C and power delivery interface.
>> It can be programmed with a firmware to handle UCSI protocol over I2C
>> interface. A GPIO is used as an interrupt line.
>> It may be used as a wakeup source, so use optional "wakeup-source" and
>> "power-domains" properties to support wakeup.
>>
>> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
>> ---
>>  .../bindings/usb/st,typec-stm32g0.yaml        | 83 +++++++++++++++++++
>>  1 file changed, 83 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml b/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
>> new file mode 100644
>> index 0000000000000..b2729bd015a1a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
>> @@ -0,0 +1,83 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/usb/st,typec-stm32g0.yaml#";
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> 
> No quotes.

ack,

> 
>> +
>> +title: STMicroelectronics STM32G0 Type-C controller bindings
> 
> s/bindings//

ack,

> 
>> +
>> +description: |
>> +  The STM32G0 MCU can be programmed to control Type-C connector(s) through I2C
>> +  typically using the UCSI protocol over I2C, with a dedicated alert
>> +  (interrupt) pin.
>> +
>> +maintainers:
>> +  - Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
>> +
>> +properties:
>> +  compatible:
>> +    const: st,stm32g0-typec
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  connector:
>> +    type: object> +    allOf:
>> +      - $ref: ../connector/usb-connector.yaml#
> 
> Full path, so /schemas/connector/...
> 
> unevaluatedProperties: false

ack,

> 
>> +
>> +  firmware-name:
>> +    description: |
>> +      Should contain the name of the default firmware image
>> +      file located on the firmware search path
>> +
>> +  wakeup-source: true
>> +  power-domains: true
> 
> maxItems

Do you mean maxItems regarding the "power-domains" property ?
This will depend on the user platform, where it's used as an I2C device.
So I'm not sure this can / should be specified here.
Could please you clarify ?

> 
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupts
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/interrupt-controller/irq.h>
>> +    i2c5 {
> 
> Just "i2c"

ack,

> 
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +
>> +      stm32g0@53 {
> 
> Generic node name describing class of the device.


I wasn't aware of generic node name for an I2C device (not talking of
the controller). I may have missed it.

Could you please clarify ?

> 
>> +        compatible = "st,stm32g0-typec";
>> +        reg = <0x53>;
>> +        /* Alert pin on GPIO PE12 */
>> +        interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
>> +        interrupt-parent = <&gpioe>;
>> +
>> +        /* Example with one type-C connector */
>> +        connector {
>> +          compatible = "usb-c-connector";
>> +          label = "USB-C";
>> +
>> +          port {
> 
> This does not look like proper schema of connector.yaml.

This refers to graph.yaml [1], where similar example is seen [2].

https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/graph.yaml#L79

https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/graph.yaml#L207

    device-1 {
        port {
            device_1_output: endpoint {
                remote-endpoint = <&device_2_input>;
            };
        };
    };
    device-2 {
        port {
            device_2_input: endpoint {
                remote-endpoint = <&device_1_output>;
            };
        };
    };


Could you please clarify this point too ?

> 
>> +            con_usb_c_ep: endpoint {
>> +              remote-endpoint = <&usbotg_hs_ep>;
>> +            };
>> +          };
>> +        };
>> +      };
>> +    };
>> +
>> +    usbotg_hs {
> 
> Generic node names, no underscores in node names.

ack, I guess you'd recommend "usb" here. I'll update it.

Thanks for reviewing,
Best Regards,
Fabrice

> 
>> +      usb-role-switch;
>> +      port {
>> +        usbotg_hs_ep: endpoint {
>> +          remote-endpoint = <&con_usb_c_ep>;
>> +        };
>> +      };
>> +    };
>> +...
> 
> 
> Best regards,
> Krzysztof