Re: [PATCH v1 2/3] drm/msm/dp: decoupling dp->id out of dp controller_id at scxxxx_dp_cfg table

[Kuogee Hsieh]

On 6/24/2022 6:15 PM, Stephen Boyd wrote:
> Quoting Kuogee Hsieh (2022-06-24 18:02:50)
> > On 6/24/2022 5:46 PM, Dmitry Baryshkov wrote:
> > > On Sat, 25 Jun 2022 at 03:28, Dmitry Baryshkov
> > > <dmitry.baryshkov@xxxxxxxxxx> wrote:
> > > > On Sat, 25 Jun 2022 at 03:23, Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx> wrote:
> > > > > On 6/24/2022 5:21 PM, Dmitry Baryshkov wrote:
> > > > > > On Sat, 25 Jun 2022 at 03:19, Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx> wrote:
> > > > > > > How can I have eDP call dpu_encoder_init() before DP calls with
> > > > > > > _dpu_kms_initialize_displayport()?
> > > > > > Why do you want to do it? They are two different encoders.
> > > > > eDP is primary display which in normal case should be bring up first if
> > > > > DP is also presented.
> > > > I do not like the concept of primary display. It is the user, who must
> > > > decide which display is primary to him. I have seen people using just
> > > > external monitors and ignoring built-in eDP completely.from
> > > > Also, why does the bring up order matters here? What do you gain by
> > > > bringing up eDP before the DP?
> > > I should probably rephrase my question to be more clear. How does
> > > changing the order of DP vs eDP bringup help you 'to fix screen
> > > corruption'.
> > it did fix the primary display correction issue if edp go first and i do
> > not know the root cause yet.
> >
> > We are still investigating it.
> >
> > However I do think currently msm_dp_config sc7280_dp_cfg has issues need
> > be addressed.
> What issues exist with sc7280_dp_cfg? It looks correct to me.


If we are going to bring up a new chipset with edp as primary only, i am 
not sure the below configuration will work?

> static const struct msm_dp_config sc7280_dp_cfg = {
>          .descs = (const struct msm_dp_desc[]) {
>                  [MSM_DP_CONTROLLER_1] = { .io_start = 0x0aea0000, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
>          },
>          .num_descs = 1,
> };