Re: [PATCH v2 2/4] dt-bindings: usb: mtk-xhci: Make all clocks required
From: Chunfeng Yun
Date: Mon Jun 27 2022 - 20:58:29 EST
Hi Nícolas,
On Thu, 2022-06-23 at 15:37 -0400, Nícolas F. R. A. Prado wrote:
> All of the clocks listed in the binding are always wired to the XHCI
> controller hardware blocks on all SoCs. The reason some clocks were
> made
> optional in the binding was to account for the fact that depending on
> the SoC, some of the clocks might be fixed (ie not controlled by
> software).
>
> Given that the devicetree should represent the hardware, make all
> clocks
> required in the binding. Subsequent patches will make the DTS changes
> to
> specify fixed-clocks for the clocks that aren't controllable.
>
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
>
> ---
>
> Changes in v2:
> - Undid clock list changes that allowed middle clocks to be missing
> from
> v1 and made all clocks required instead
> - Rewrote commit message and title
>
> Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 4 +
> ---
> 1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-
> xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-
> xhci.yaml
> index 63cbc2b62d18..1444d18ef9bc 100644
> --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
> +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
> @@ -67,7 +67,6 @@ properties:
> maxItems: 1
>
> clocks:
> - minItems: 1
> items:
> - description: Controller clock used by normal mode
> - description: Reference clock used by low power mode etc
> @@ -76,9 +75,8 @@ properties:
> - description: controller clock
>
> clock-names:
> - minItems: 1
> items:
> - - const: sys_ck # required, the following ones are optional
> + - const: sys_ck
> - const: ref_ck
> - const: mcu_ck
> - const: dma_ck
This patch causes more check warning, I prefer to leave dt-bindings
unchanged, but just fix mt8195's dts warning instead, thanks a lot