[PATCH V12 3/9] PCI: Create PCIe library functions in support of DOE mailboxes.
From: ira . weiny
Date: Tue Jun 28 2022 - 00:16:00 EST
From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Introduced in a PCIe r6.0, sec 6.30, DOE provides a config space based
mailbox with standard protocol discovery. Each mailbox is accessed
through a DOE Extended Capability.
Each DOE mailbox must support the DOE discovery protocol in addition to
any number of additional protocols.
Define core PCIe functionality to manage a single PCIe DOE mailbox at a
defined config space offset. Functionality includes iterating,
creating, query of supported protocol, and task submission. Destruction
of the mailboxes is device managed.
If interrupts are desired, the interrupt number can be queried and
passed to the create function. Passing a negative value disables
interrupts for that mailbox. It is the caller's responsibility to ensure
enough interrupt vectors are allocated.
Cc: "Li, Ming" <ming4.li@xxxxxxxxx>
Cc: Bjorn Helgaas <helgaas@xxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Co-developed-by: Ira Weiny <ira.weiny@xxxxxxxxx>
Signed-off-by: Ira Weiny <ira.weiny@xxxxxxxxx>
---
Changes from V11
Bjorn: s/PCI/PCIe
use dev_fmt
move cap_offset in struct pci_doe_mb
use break and return from a central place
fix interrupt prints
s/PCI_DOE_CAP_IRQ/PCI_DOE_CAP_INT_MSG_NUM
s/irq_msg_num/int_msg_num
when the value is not an irq but rather the
interrupt message number for the DOE
s/irq/IRQ in comments
Clarify request and response payload size units
In addition clarify the rv units Check for
invalid response payload size (must be at least
1 DW)
Dan: s/EOPNOTSUPP/ENXIO/
Add pci_doe_for_each_off to .clang-format
use xarray for supported protocols
s/pci_doe_create_mb/pcim_doe_create_mb/
Remove pci_doe_destroy_mb
Dan: Convert the statemachine to process tasks as work items
Define pci_doe_write_ctrl()
Introduce pci_doe_irq_enabled()
issue a stand alone abort
Don't go through the state machine for the abort. Just
poll/irq until the response comes back.
Remove Wait Abort state
A wait abort can just be triggered from outside and stop
the state machine from whatever loop it may be in.
Let the state machine issue the abort itself and wait
for it to return or not.
Remove Wait abort on error
Issue the abort directly before returning. Abort
failure will flag the MB dead.
Remove workqueue processing from state machine
clean up function locations in the file
Move abort flag/document it
React to an abort while aborting and bail. This will
mark the mailbox dead.
Convert task to a work item
Create a workqueue in the mailbox. Remove cur_task and
locking. Set DEAD when taking mailbox down.
print error on marking mailbox dead
Introduce signal_task_abort
flatten out the state machine
Changes from V9
Lukas Wunner
Update comments
Move private doe structures and defines from pci-doe.h to doe.c
check Data Obj Ready prior to last ack
Davidlohr
make task_lock a spinlock
Lukas/Jonathan
Remove special case of error in irq handler
Fix potential race with the scheduling of a task when one is ending.
The current task can't be retired until the state
machine is idle. Otherwise a new task work item may run
and the state machine would be out of sync.
Changes from V8
Remove Bjorn's ack
Expose a function to find the irq number for a mailbox based on
offset. This is the code Jonathan proposed for finding the irq
number here:
https://lore.kernel.org/linux-cxl/20220503153449.4088-2-Jonathan.Cameron@xxxxxxxxxx/
This removes funky bool parameter to create.
Move pci_set_master() within the pci_doe_enable_irq()
Per Bjorn
Clean up commit messages
move pci-doe.c to doe.c
Clean up PCI spec references
Ensure all messages use pci_*()
Add offset to error messages to distinguish mailboxes
use hex for DOE offsets
Print 4 nibbles for Vendor ID and 2 for type.
s/irq/IRQ in comments
Fix long lines
Fix typos
Changes from V7
Add a Kconfig for this functionality
Fix bug in pci_doe_supports_prot()
Rebased on cxl-pending
Changes from V6
Clean up signed off by lines
Make this functionality all PCI library functions
Clean up header files
s/pci_doe_irq/pci_doe_irq_handler
Use pci_{request,free}_irq
Remove irq_name (maintained by pci_request_irq)
Fix checks to use an irq
Consistently use u16 for cap_offset
Cleanup kdocs and comments
Create a helper retire_cur_task() to handle locking of the
current task pointer.
Remove devm_ calls from PCI layer.
The devm_ calls do not allow for the pci_doe_mb objects
to be tied to an auxiliary device. Leave it to the
caller to use devm_ if desired.
From Dan Williams
s/cb/end_task/; Pass pci_doe_task to end_task
Clarify exchange/task/request/response.
Merge pci_doe_task and pci_doe_exchange into
pci_doe_task which represents a single
request/response task for the state machine to
process.
Simplify submitting work to the mailbox
Replace pci_doe_exchange_sync() with
pci_doe_submit_task() Consumers of the mailbox
are now responsible for setting up callbacks
within a task object and submitting them to the
mailbox to be processed.
Remove WARN_ON when task != NULL and be sure to abort that task.
Convert abort/dead to atomic flags
s/state_lock/task_lock to better define what the lock is
protecting
Remove all the auxiliary bus code from the PCI layer
The PCI layer provides helpers to use the DOE
Mailboxes. Each subsystem can then use the
helpers as they see fit. The CXL layer in this
series uses aux devices to manage the new
pci_doe_mb objects.
From Bjorn
Clarify the fact that DOE mailboxes are capabilities of
the device.
Code clean ups
Cleanup Makefile
Update references to PCI SIG spec v6.0
Move this attribution here:
This code is based on Jonathan's V4 series here:
https://lore.kernel.org/linux-cxl/20210524133938.2815206-1-Jonathan.Cameron@xxxxxxxxxx/
Changes from V5
From Bjorn
s/pci_WARN/pci_warn
Add timeout period to print
Trim to 80 chars
Use Tabs for DOE define spacing
Use %#x for clarity
From Jonathan
Addresses concerns about the order of unwinding stuff
s/doe/doe_dev in pci_doe_exhcnage_sync
Correct kernel Doc comment
Move pci_doe_task_complete() down in the file.
Rework pci_doe_irq()
process STATUS_ERROR first
Return IRQ_NONE if the irq is not processed
Use PCI_DOE_STATUS_INT_STATUS explicitly to
clear the irq
Clean up goto label s/err_free_irqs/err_free_irq
use devm_kzalloc for doe struct
clean up error paths in pci_doe_probe
s/pci_doe_drv/pci_doe
remove include mutex.h
remove device name and define, move it in the next patch which uses it
use devm_kasprintf() for irq_name
use devm_request_irq()
remove pci_doe_unregister()
[get/put]_device() were unneeded and with the use of
devm_* this function can be removed completely.
refactor pci_doe_register and s/pci_doe_register/pci_doe_reg_irq
make this function just a registration of the irq and
move pci_doe_abort() into pci_doe_probe()
use devm_* to allocate the protocol array
Changes from Jonathan's V4
Move the DOE MB code into the DOE auxiliary driver
Remove Task List in favor of a wait queue
Changes from Ben
remove CXL references
propagate rc from pci functions on error
---
.clang-format | 1 +
drivers/pci/Kconfig | 3 +
drivers/pci/Makefile | 1 +
drivers/pci/doe.c | 689 ++++++++++++++++++++++++++++++++++
include/linux/pci-doe.h | 81 ++++
include/uapi/linux/pci_regs.h | 29 +-
6 files changed, 803 insertions(+), 1 deletion(-)
create mode 100644 drivers/pci/doe.c
create mode 100644 include/linux/pci-doe.h
diff --git a/.clang-format b/.clang-format
index fa959436bcfd..7bebb066f2a2 100644
--- a/.clang-format
+++ b/.clang-format
@@ -420,6 +420,7 @@ ForEachMacros:
- 'of_property_for_each_string'
- 'of_property_for_each_u32'
- 'pci_bus_for_each_resource'
+ - 'pci_doe_for_each_off'
- 'pcl_for_each_chunk'
- 'pcl_for_each_segment'
- 'pcm_for_each_format'
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 133c73207782..b2f2e588a817 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -121,6 +121,9 @@ config XEN_PCIDEV_FRONTEND
config PCI_ATS
bool
+config PCI_DOE
+ bool
+
config PCI_ECAM
bool
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 0da6b1ebc694..2680e4c92f0a 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_PCI_ECAM) += ecam.o
obj-$(CONFIG_PCI_P2PDMA) += p2pdma.o
obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
obj-$(CONFIG_VGA_ARB) += vgaarb.o
+obj-$(CONFIG_PCI_DOE) += doe.o
# Endpoint library must be initialized before its users
obj-$(CONFIG_PCI_ENDPOINT) += endpoint/
diff --git a/drivers/pci/doe.c b/drivers/pci/doe.c
new file mode 100644
index 000000000000..4a7a1e988124
--- /dev/null
+++ b/drivers/pci/doe.c
@@ -0,0 +1,689 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Data Object Exchange
+ * PCIe r6.0, sec 6.30 DOE
+ *
+ * Copyright (C) 2021 Huawei
+ * Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
+ *
+ * Copyright (C) 2022 Intel Corporation
+ * Ira Weiny <ira.weiny@xxxxxxxxx>
+ */
+
+#define dev_fmt(fmt) "DOE: " fmt
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/pci-doe.h>
+#include <linux/workqueue.h>
+
+#define PCI_DOE_PROTOCOL_DISCOVERY 0
+
+#define PCI_DOE_BUSY_MAX_RETRIES 16
+#define PCI_DOE_POLL_INTERVAL (HZ / 128)
+
+/* Timeout of 1 second from 6.30.2 Operation, PCI Spec r6.0 */
+#define PCI_DOE_TIMEOUT HZ
+
+#define PCI_DOE_FLAG_ABORT 0
+#define PCI_DOE_FLAG_IRQ 1
+#define PCI_DOE_FLAG_DEAD 2
+
+/**
+ * struct pci_doe_mb - State for a single DOE mailbox
+ *
+ * This state is used to manage a single DOE mailbox capability. All fields
+ * should be considered opaque to the consumers and the structure passed into
+ * the helpers below after being created by devm_pci_doe_create()
+ *
+ * @pdev: PCI device this mailbox belongs to
+ * @cap_offset: Capability offset
+ * @int_msg_num: DOE Interrupt Message Number; negative if irqs are not used
+ * @prots: Array of protocols supported (encoded as long values)
+ * @wq: Wait queue for work items awaiting irq/abort
+ * @work_queue: Queue of pci_doe_work items
+ * @flags: Bit array of PCI_DOE_FLAG_* flags
+ *
+ * Note: @prots can't be allocated with struct size because the number of
+ * protocols is not known until after this structure is in use. However, the
+ * single discovery protocol is always required to query for the number of
+ * protocols.
+ */
+struct pci_doe_mb {
+ struct pci_dev *pdev;
+ u16 cap_offset;
+ int int_msg_num;
+ struct xarray prots;
+
+ wait_queue_head_t wq;
+ struct workqueue_struct *work_queue;
+ unsigned long flags;
+};
+
+static irqreturn_t pci_doe_irq_handler(int irq, void *data)
+{
+ struct pci_doe_mb *doe_mb = data;
+ struct pci_dev *pdev = doe_mb->pdev;
+ int offset = doe_mb->cap_offset;
+ u32 val;
+
+ pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
+ if (FIELD_GET(PCI_DOE_STATUS_INT_STATUS, val)) {
+ pci_write_config_dword(pdev, offset + PCI_DOE_STATUS,
+ PCI_DOE_STATUS_INT_STATUS);
+ set_bit(PCI_DOE_FLAG_IRQ, &doe_mb->flags);
+ wake_up(&doe_mb->wq);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+static bool pci_doe_irq_enabled(struct pci_doe_mb *doe_mb)
+{
+ return doe_mb->int_msg_num >= 0;
+}
+
+static void pci_doe_abort(struct pci_doe_mb *doe_mb)
+{
+ set_bit(PCI_DOE_FLAG_ABORT, &doe_mb->flags);
+ wake_up(&doe_mb->wq);
+}
+
+/*
+ * Returned from the wait functions to indicate that an abort has been issued
+ */
+#define DOE_WAIT_ABORT 1
+
+static int pci_doe_arm_wait(struct pci_doe_mb *doe_mb)
+{
+ if (test_and_clear_bit(PCI_DOE_FLAG_ABORT, &doe_mb->flags))
+ return DOE_WAIT_ABORT;
+ clear_bit(PCI_DOE_FLAG_IRQ, &doe_mb->flags);
+ return 0;
+}
+
+static int pci_doe_wait_poll(struct pci_doe_mb *doe_mb, unsigned long timeout)
+{
+ if (wait_event_timeout(doe_mb->wq,
+ test_bit(PCI_DOE_FLAG_ABORT, &doe_mb->flags),
+ timeout))
+ return DOE_WAIT_ABORT;
+ return 0;
+}
+
+static int pci_doe_wait_irq_or_poll(struct pci_doe_mb *doe_mb)
+{
+ if (pci_doe_irq_enabled(doe_mb)) {
+ wait_event_timeout(doe_mb->wq,
+ test_bit(PCI_DOE_FLAG_IRQ, &doe_mb->flags) ||
+ test_bit(PCI_DOE_FLAG_ABORT, &doe_mb->flags),
+ PCI_DOE_TIMEOUT);
+ if (test_bit(PCI_DOE_FLAG_ABORT, &doe_mb->flags))
+ return DOE_WAIT_ABORT;
+ return 0;
+ }
+
+ return pci_doe_wait_poll(doe_mb, PCI_DOE_POLL_INTERVAL);
+}
+
+static void pci_doe_write_ctrl(struct pci_doe_mb *doe_mb, u32 val)
+{
+ struct pci_dev *pdev = doe_mb->pdev;
+ int offset = doe_mb->cap_offset;
+
+ if (pci_doe_irq_enabled(doe_mb))
+ val |= PCI_DOE_CTRL_INT_EN;
+ pci_write_config_dword(pdev, offset + PCI_DOE_CTRL, val);
+}
+
+static int pci_doe_issue_abort(struct pci_doe_mb *doe_mb)
+{
+ struct pci_dev *pdev = doe_mb->pdev;
+ int offset = doe_mb->cap_offset;
+ unsigned long timeout_jiffies;
+
+ pci_dbg(pdev, "[%x] Issuing Abort\n", offset);
+
+ /*
+ * Abort detected while aborting; something is really broken or the
+ * mailbox is being destroyed.
+ */
+ if (pci_doe_arm_wait(doe_mb))
+ return -EIO;
+
+ timeout_jiffies = jiffies + PCI_DOE_TIMEOUT;
+ pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_ABORT);
+
+ do {
+ u32 val;
+
+ /*
+ * Abort detected while aborting; something is really broken or
+ * the mailbox is being destroyed.
+ */
+ if (pci_doe_wait_irq_or_poll(doe_mb))
+ return -EIO;
+ pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
+
+ /* Abort success! */
+ if (!FIELD_GET(PCI_DOE_STATUS_ERROR, val) &&
+ !FIELD_GET(PCI_DOE_STATUS_BUSY, val))
+ return 0;
+
+ } while (!time_after(jiffies, timeout_jiffies));
+
+ /* Abort has timed out and the MB is dead */
+ pci_err(pdev, "[%x] ABORT timed out\n", offset);
+ return -EIO;
+}
+
+static int pci_doe_send_req(struct pci_doe_mb *doe_mb,
+ struct pci_doe_task *task)
+{
+ struct pci_dev *pdev = doe_mb->pdev;
+ int offset = doe_mb->cap_offset;
+ u32 val;
+ int i;
+
+ /*
+ * Check the DOE busy bit is not set. If it is set, this could indicate
+ * someone other than Linux (e.g. firmware) is using the mailbox. Note
+ * it is expected that firmware and OS will negotiate access rights via
+ * an, as yet to be defined method.
+ */
+ pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
+ if (FIELD_GET(PCI_DOE_STATUS_BUSY, val))
+ return -EBUSY;
+
+ if (FIELD_GET(PCI_DOE_STATUS_ERROR, val))
+ return -EIO;
+
+ /* Write DOE Header */
+ val = FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_VID, task->prot.vid) |
+ FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, task->prot.type);
+ pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, val);
+ /* Length is 2 DW of header + length of payload in DW */
+ pci_write_config_dword(pdev, offset + PCI_DOE_WRITE,
+ FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH,
+ 2 + task->request_pl_sz /
+ sizeof(u32)));
+ for (i = 0; i < task->request_pl_sz / sizeof(u32); i++)
+ pci_write_config_dword(pdev, offset + PCI_DOE_WRITE,
+ task->request_pl[i]);
+
+ pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_GO);
+
+ /* Request is sent - now wait for poll or IRQ */
+ return 0;
+}
+
+static bool pci_doe_data_obj_ready(struct pci_doe_mb *doe_mb)
+{
+ struct pci_dev *pdev = doe_mb->pdev;
+ int offset = doe_mb->cap_offset;
+ u32 val;
+
+ pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
+ if (FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val))
+ return true;
+ return false;
+}
+
+static int pci_doe_recv_resp(struct pci_doe_mb *doe_mb, struct pci_doe_task *task)
+{
+ struct pci_dev *pdev = doe_mb->pdev;
+ int offset = doe_mb->cap_offset;
+ size_t length, payload_length;
+ u32 val;
+ int i;
+
+ /* Read the first dword to get the protocol */
+ pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val);
+ if ((FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val) != task->prot.vid) ||
+ (FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val) != task->prot.type)) {
+ pci_err(pdev,
+ "[%x] expected [VID, Protocol] = [%04x, %02x], got [%04x, %02x]\n",
+ doe_mb->cap_offset,
+ task->prot.vid, task->prot.type,
+ FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val),
+ FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val));
+ return -EIO;
+ }
+
+ pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
+ /* Read the second dword to get the length */
+ pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val);
+ pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
+
+ length = FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH, val);
+ if (length > SZ_1M || length < 2)
+ return -EIO;
+
+ /* First 2 dwords have already been read */
+ length -= 2;
+ payload_length = min(length, task->response_pl_sz / sizeof(u32));
+ /* Read the rest of the response payload */
+ for (i = 0; i < payload_length; i++) {
+ pci_read_config_dword(pdev, offset + PCI_DOE_READ,
+ &task->response_pl[i]);
+ /* Prior to the last ack, ensure Data Object Ready */
+ if (i == (payload_length-1) && !pci_doe_data_obj_ready(doe_mb))
+ return -EIO;
+ pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
+ }
+
+ /* Flush excess length */
+ for (; i < length; i++) {
+ pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val);
+ pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
+ }
+
+ /* Final error check to pick up on any since Data Object Ready */
+ pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
+ if (FIELD_GET(PCI_DOE_STATUS_ERROR, val))
+ return -EIO;
+
+ return min(length, task->response_pl_sz / sizeof(u32)) * sizeof(u32);
+}
+
+static void signal_task_complete(struct pci_doe_task *task, int rv)
+{
+ task->rv = rv;
+ task->complete(task);
+}
+
+static void signal_task_abort(struct pci_doe_task *task, int rv)
+{
+ struct pci_doe_mb *doe_mb = task->doe_mb;
+ struct pci_dev *pdev = doe_mb->pdev;
+
+ if (pci_doe_issue_abort(doe_mb)) {
+ /* On failure set the MB dead - no more submissions */
+ pci_err(pdev, "[%x] Abort failed marking mailbox dead\n",
+ doe_mb->cap_offset);
+ set_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags);
+ }
+ signal_task_complete(task, rv);
+}
+
+static void doe_statemachine_work(struct work_struct *work)
+{
+ struct pci_doe_task *task = container_of(work, struct pci_doe_task,
+ work);
+ struct pci_doe_mb *doe_mb = task->doe_mb;
+ struct pci_dev *pdev = doe_mb->pdev;
+ int offset = doe_mb->cap_offset;
+ unsigned int busy_retries = 0;
+ unsigned long timeout_jiffies;
+ u32 val;
+ int rc;
+
+ if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags)) {
+ signal_task_complete(task, -EIO);
+ return;
+ }
+
+ /* Send request */
+retry_req:
+ if (pci_doe_arm_wait(doe_mb)) {
+ signal_task_abort(task, -EIO);
+ return;
+ }
+
+ rc = pci_doe_send_req(doe_mb, task);
+
+ /*
+ * The specification does not provide any guidance on how long
+ * some other entity could keep the DOE busy, so try for 1
+ * second then fail. Busy handling is best effort only, because
+ * there is no way of avoiding racing against another user of
+ * the DOE.
+ */
+ if (rc == -EBUSY) {
+ busy_retries++;
+ if (busy_retries == PCI_DOE_BUSY_MAX_RETRIES) {
+ pci_warn(pdev,
+ "[%x] busy for too long (> 1 sec)\n",
+ offset);
+ signal_task_complete(task, rc);
+ return;
+ }
+ if (pci_doe_wait_poll(doe_mb, HZ / PCI_DOE_BUSY_MAX_RETRIES)) {
+ signal_task_abort(task, rc);
+ return;
+ }
+ goto retry_req;
+ } else if (rc) {
+ signal_task_abort(task, rc);
+ return;
+ }
+
+ timeout_jiffies = jiffies + HZ;
+ if (pci_doe_wait_irq_or_poll(doe_mb)) {
+ signal_task_abort(task, -EIO);
+ return;
+ }
+
+ /* Poll for response */
+retry_resp:
+ if (pci_doe_arm_wait(doe_mb)) {
+ signal_task_abort(task, -EIO);
+ return;
+ }
+
+ pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
+ if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) {
+ signal_task_abort(task, -EIO);
+ return;
+ }
+
+ if (!FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val)) {
+ if (time_after(jiffies, timeout_jiffies)) {
+ signal_task_abort(task, -ETIMEDOUT);
+ return;
+ }
+ if (pci_doe_wait_poll(doe_mb, PCI_DOE_POLL_INTERVAL)) {
+ signal_task_abort(task, -EIO);
+ return;
+ }
+ goto retry_resp;
+ }
+
+ rc = pci_doe_recv_resp(doe_mb, task);
+ if (rc < 0) {
+ signal_task_abort(task, rc);
+ return;
+ }
+
+ signal_task_complete(task, rc);
+}
+
+static void pci_doe_task_complete(struct pci_doe_task *task)
+{
+ complete(task->private);
+}
+
+static int pci_doe_discovery(struct pci_doe_mb *doe_mb, u8 *index, u16 *vid,
+ u8 *protocol)
+{
+ u32 request_pl = FIELD_PREP(PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX,
+ *index);
+ u32 response_pl;
+ DECLARE_COMPLETION_ONSTACK(c);
+ struct pci_doe_task task = {
+ .prot.vid = PCI_VENDOR_ID_PCI_SIG,
+ .prot.type = PCI_DOE_PROTOCOL_DISCOVERY,
+ .request_pl = &request_pl,
+ .request_pl_sz = sizeof(request_pl),
+ .response_pl = &response_pl,
+ .response_pl_sz = sizeof(response_pl),
+ .complete = pci_doe_task_complete,
+ .private = &c,
+ };
+ int ret;
+
+ ret = pci_doe_submit_task(doe_mb, &task);
+ if (ret < 0)
+ return ret;
+
+ wait_for_completion(&c);
+
+ if (task.rv != sizeof(response_pl))
+ return -EIO;
+
+ *vid = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_VID, response_pl);
+ *protocol = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL,
+ response_pl);
+ *index = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_NEXT_INDEX,
+ response_pl);
+
+ return 0;
+}
+
+static void *pci_doe_xa_entry(u16 vid, u8 prot)
+{
+ return (void *)(((unsigned long)vid << 16) | prot);
+}
+
+static int pci_doe_cache_protocols(struct pci_doe_mb *doe_mb)
+{
+ u8 index = 0;
+ u8 xa_idx = 0;
+
+ do {
+ int rc;
+ u16 vid;
+ u8 prot;
+
+ rc = pci_doe_discovery(doe_mb, &index, &vid, &prot);
+ if (rc)
+ return rc;
+
+ pci_dbg(doe_mb->pdev,
+ "[%x] Found protocol %d vid: %x prot: %x\n",
+ doe_mb->cap_offset, xa_idx, vid, prot);
+
+ rc = xa_insert(&doe_mb->prots, xa_idx++,
+ pci_doe_xa_entry(vid, prot), GFP_KERNEL);
+ if (rc)
+ return -ENOMEM;
+ } while (index);
+
+ return 0;
+}
+
+static int pci_doe_enable_irq(struct pci_doe_mb *doe_mb,
+ unsigned int int_msg_num)
+{
+ struct pci_dev *pdev = doe_mb->pdev;
+ int offset = doe_mb->cap_offset;
+ int rc;
+
+ /*
+ * Enabling bus mastering is required for MSI/MSIx. It is safe to call
+ * this multiple times and thus is called here to ensure that mastering
+ * is enabled even if the driver has done so.
+ */
+ pci_set_master(pdev);
+ rc = pci_request_irq(pdev, int_msg_num, pci_doe_irq_handler, NULL,
+ doe_mb, "DOE[%x %s]", offset, pci_name(pdev));
+ if (rc)
+ return rc;
+
+ doe_mb->int_msg_num = int_msg_num;
+ pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_INT_EN);
+
+ return 0;
+}
+
+static void pci_doe_free_mb(struct pci_doe_mb *doe_mb)
+{
+ if (doe_mb->work_queue)
+ destroy_workqueue(doe_mb->work_queue);
+ if (pci_doe_irq_enabled(doe_mb))
+ pci_free_irq(doe_mb->pdev, doe_mb->int_msg_num, doe_mb);
+ xa_destroy(&doe_mb->prots);
+ kfree(doe_mb);
+}
+
+/**
+ * pci_doe_get_int_msg_num() - Return the interrupt message number for the
+ * mailbox at offset
+ *
+ * @pdev: The PCI device
+ * @offset: Offset of the DOE mailbox
+ *
+ * Returns: IRQ number on success
+ * -errno if IRQs are not supported on this mailbox
+ */
+int pci_doe_get_int_msg_num(struct pci_dev *pdev, int offset)
+{
+ u32 val;
+
+ pci_read_config_dword(pdev, offset + PCI_DOE_CAP, &val);
+ if (!FIELD_GET(PCI_DOE_CAP_INT_SUP, val))
+ return -ENXIO;
+
+ return FIELD_GET(PCI_DOE_CAP_INT_MSG_NUM, val);
+}
+EXPORT_SYMBOL_GPL(pci_doe_get_int_msg_num);
+
+static void pci_doe_destroy_mb(void *mb)
+{
+ struct pci_doe_mb *doe_mb = mb;
+
+ /* Mark going down */
+ set_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags);
+
+ /* Abort any in progress work items */
+ pci_doe_abort(doe_mb);
+
+ /* Flush remaining work items */
+ flush_workqueue(doe_mb->work_queue);
+
+ pci_doe_free_mb(doe_mb);
+}
+
+/**
+ * pcim_doe_create_mb() - Create a DOE mailbox object
+ *
+ * @pdev: PCI device to create the DOE mailbox for
+ * @cap_offset: Offset of the DOE mailbox
+ * @int_msg_num: Interrupt message number to use; a negative value means don't
+ * use interrupts
+ *
+ * Create a single mailbox object to manage the mailbox protocol at the
+ * cap_offset specified.
+ *
+ * Caller should allocate PCI IRQ vectors before passing a possitive value for
+ * int_msg_num.
+ *
+ * RETURNS: created mailbox object on success
+ * ERR_PTR(-errno) on failure
+ */
+struct pci_doe_mb *pcim_doe_create_mb(struct pci_dev *pdev, u16 cap_offset,
+ int int_msg_num)
+{
+ struct pci_doe_mb *doe_mb;
+ int rc;
+
+ doe_mb = kzalloc(sizeof(*doe_mb), GFP_KERNEL);
+ if (!doe_mb)
+ return ERR_PTR(-ENOMEM);
+
+ doe_mb->pdev = pdev;
+ doe_mb->int_msg_num = -1;
+ doe_mb->cap_offset = cap_offset;
+
+ xa_init(&doe_mb->prots);
+ init_waitqueue_head(&doe_mb->wq);
+
+ if (int_msg_num >= 0) {
+ rc = pci_doe_enable_irq(doe_mb, int_msg_num);
+ if (rc)
+ pci_err(pdev,
+ "[%x] enable requested IRQ (%d) failed : %d\n",
+ doe_mb->cap_offset, int_msg_num, rc);
+ }
+
+ doe_mb->work_queue = alloc_ordered_workqueue("DOE: [%x]", 0,
+ doe_mb->cap_offset);
+ if (!doe_mb->work_queue) {
+ pci_err(pdev, "[%x] failed to allocate work queue\n",
+ doe_mb->cap_offset);
+ pci_doe_free_mb(doe_mb);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* Reset the mailbox by issuing an abort */
+ rc = pci_doe_issue_abort(doe_mb);
+ if (rc) {
+ pci_err(pdev, "[%x] failed to reset : %d\n",
+ doe_mb->cap_offset, rc);
+ pci_doe_free_mb(doe_mb);
+ return ERR_PTR(rc);
+ }
+
+ if (devm_add_action_or_reset(&pdev->dev, pci_doe_destroy_mb, doe_mb))
+ return ERR_PTR(-EIO);
+
+ rc = pci_doe_cache_protocols(doe_mb);
+ if (rc) {
+ pci_err(pdev, "[%x] failed to cache protocols : %d\n",
+ doe_mb->cap_offset, rc);
+ return ERR_PTR(rc);
+ }
+
+ return doe_mb;
+}
+EXPORT_SYMBOL_GPL(pcim_doe_create_mb);
+
+/**
+ * pci_doe_supports_prot() - Return if the DOE instance supports the given
+ * protocol
+ * @doe_mb: DOE mailbox capability to query
+ * @vid: Protocol Vendor ID
+ * @type: Protocol type
+ *
+ * RETURNS: True if the DOE mailbox supports the protocol specified
+ */
+bool pci_doe_supports_prot(struct pci_doe_mb *doe_mb, u16 vid, u8 type)
+{
+ unsigned long index;
+ void *entry;
+
+ /* The discovery protocol must always be supported */
+ if (vid == PCI_VENDOR_ID_PCI_SIG && type == PCI_DOE_PROTOCOL_DISCOVERY)
+ return true;
+
+ xa_for_each(&doe_mb->prots, index, entry)
+ if (entry == pci_doe_xa_entry(vid, type))
+ return true;
+
+ return false;
+}
+EXPORT_SYMBOL_GPL(pci_doe_supports_prot);
+
+/**
+ * pci_doe_submit_task() - Submit a task to be processed by the state machine
+ *
+ * @doe_mb: DOE mailbox capability to submit to
+ * @task: task to be queued
+ *
+ * Submit a DOE task (request/response) to the DOE mailbox to be processed.
+ * Returns upon queueing the task object. If the queue is full this function
+ * will sleep until there is room in the queue.
+ *
+ * task->complete will be called when the state machine is done processing this
+ * task.
+ *
+ * Excess data will be discarded.
+ *
+ * RETURNS: 0 when task has been successful queued, -ERRNO on error
+ */
+int pci_doe_submit_task(struct pci_doe_mb *doe_mb, struct pci_doe_task *task)
+{
+ if (!pci_doe_supports_prot(doe_mb, task->prot.vid, task->prot.type))
+ return -EINVAL;
+
+ /*
+ * DOE requests must be a whole number of DW
+ * and the response needs to be big enough for at least 1 DW
+ */
+ if (task->request_pl_sz % sizeof(u32) ||
+ task->response_pl_sz < sizeof(u32))
+ return -EINVAL;
+
+ if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags))
+ return -EIO;
+
+ task->doe_mb = doe_mb;
+ INIT_WORK(&task->work, doe_statemachine_work);
+ queue_work(doe_mb->work_queue, &task->work);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pci_doe_submit_task);
diff --git a/include/linux/pci-doe.h b/include/linux/pci-doe.h
new file mode 100644
index 000000000000..805b58ff4016
--- /dev/null
+++ b/include/linux/pci-doe.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Data Object Exchange
+ * PCIe r6.0, sec 6.30 DOE
+ *
+ * Copyright (C) 2021 Huawei
+ * Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
+ *
+ * Copyright (C) 2022 Intel Corporation
+ * Ira Weiny <ira.weiny@xxxxxxxxx>
+ */
+
+#ifndef LINUX_PCI_DOE_H
+#define LINUX_PCI_DOE_H
+
+#include <linux/completion.h>
+
+struct pci_doe_protocol {
+ u16 vid;
+ u8 type;
+};
+
+struct pci_doe_mb;
+
+/**
+ * struct pci_doe_task - represents a single query/response
+ *
+ * @prot: DOE Protocol
+ * @request_pl: The request payload
+ * @request_pl_sz: Size of the request payload (bytes)
+ * @response_pl: The response payload
+ * @response_pl_sz: Size of the response payload (bytes)
+ * @rv: Return value. Length of received response or error (bytes)
+ * @complete: Called when task is complete
+ * @private: Private data for the consumer
+ * @work: Used internally by the mailbox
+ * @doe_mb: Used internally by the mailbox
+ *
+ * The payload sizes and rv are specified in bytes with the following
+ * restrictions concerning the protocol.
+ *
+ * 1) The request_pl_sz must be a multiple of double words (4 bytes)
+ * 2) The response_pl_sz must be >= a single double word (4 bytes)
+ * 3) rv is returned as bytes but it will be a multiple of double words
+ *
+ * NOTE there is no need for the caller to initialize work or doe_mb.
+ */
+struct pci_doe_task {
+ struct pci_doe_protocol prot;
+ u32 *request_pl;
+ size_t request_pl_sz;
+ u32 *response_pl;
+ size_t response_pl_sz;
+ int rv;
+ void (*complete)(struct pci_doe_task *task);
+ void *private;
+
+ /* No need for the user to initialize these fields */
+ struct work_struct work;
+ struct pci_doe_mb *doe_mb;
+};
+
+/**
+ * pci_doe_for_each_off - Iterate each DOE capability
+ * @pdev: struct pci_dev to iterate
+ * @off: u16 of config space offset of each mailbox capability found
+ */
+#define pci_doe_for_each_off(pdev, off) \
+ for (off = pci_find_next_ext_capability(pdev, off, \
+ PCI_EXT_CAP_ID_DOE); \
+ off > 0; \
+ off = pci_find_next_ext_capability(pdev, off, \
+ PCI_EXT_CAP_ID_DOE))
+
+int pci_doe_get_int_msg_num(struct pci_dev *pdev, int offset);
+struct pci_doe_mb *pcim_doe_create_mb(struct pci_dev *pdev, u16 cap_offset,
+ int irq);
+bool pci_doe_supports_prot(struct pci_doe_mb *doe_mb, u16 vid, u8 type);
+int pci_doe_submit_task(struct pci_doe_mb *doe_mb, struct pci_doe_task *task);
+
+#endif
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index bee1a9ed6e66..9d50678f3f62 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -736,7 +736,8 @@
#define PCI_EXT_CAP_ID_DVSEC 0x23 /* Designated Vendor-Specific */
#define PCI_EXT_CAP_ID_DLF 0x25 /* Data Link Feature */
#define PCI_EXT_CAP_ID_PL_16GT 0x26 /* Physical Layer 16.0 GT/s */
-#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PL_16GT
+#define PCI_EXT_CAP_ID_DOE 0x2E /* Data Object Exchange */
+#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_DOE
#define PCI_EXT_CAP_DSN_SIZEOF 12
#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40
@@ -1102,4 +1103,30 @@
#define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_MASK 0x000000F0
#define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_SHIFT 4
+/* Data Object Exchange */
+#define PCI_DOE_CAP 0x04 /* DOE Capabilities Register */
+#define PCI_DOE_CAP_INT_SUP 0x00000001 /* Interrupt Support */
+#define PCI_DOE_CAP_INT_MSG_NUM 0x00000ffe /* Interrupt Message Number */
+#define PCI_DOE_CTRL 0x08 /* DOE Control Register */
+#define PCI_DOE_CTRL_ABORT 0x00000001 /* DOE Abort */
+#define PCI_DOE_CTRL_INT_EN 0x00000002 /* DOE Interrupt Enable */
+#define PCI_DOE_CTRL_GO 0x80000000 /* DOE Go */
+#define PCI_DOE_STATUS 0x0c /* DOE Status Register */
+#define PCI_DOE_STATUS_BUSY 0x00000001 /* DOE Busy */
+#define PCI_DOE_STATUS_INT_STATUS 0x00000002 /* DOE Interrupt Status */
+#define PCI_DOE_STATUS_ERROR 0x00000004 /* DOE Error */
+#define PCI_DOE_STATUS_DATA_OBJECT_READY 0x80000000 /* Data Object Ready */
+#define PCI_DOE_WRITE 0x10 /* DOE Write Data Mailbox Register */
+#define PCI_DOE_READ 0x14 /* DOE Read Data Mailbox Register */
+
+/* DOE Data Object - note not actually registers */
+#define PCI_DOE_DATA_OBJECT_HEADER_1_VID 0x0000ffff
+#define PCI_DOE_DATA_OBJECT_HEADER_1_TYPE 0x00ff0000
+#define PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH 0x0003ffff
+
+#define PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX 0x000000ff
+#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_VID 0x0000ffff
+#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL 0x00ff0000
+#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_NEXT_INDEX 0xff000000
+
#endif /* LINUX_PCI_REGS_H */
--
2.35.3