[PATCH 2/2] serial: 8250: dw: Fix NULL pointer dereference

[Jeremy Linton]

Similarly to e6a08c6949cb, ACPI machines don't have
a pdata setup, leading to a null pointer dereference
when dw8250_handle_irq runs.

Fixes: aa63d786cea2 ("serial: 8250: dw: Add support for DMA flow controlling devices")
Signed-off-by: Jeremy Linton <jeremy.linton@xxxxxxx>
---
 drivers/tty/serial/8250/8250_dw.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 53e488beb8c2..06f80090cbb9 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -237,10 +237,13 @@ static int dw8250_handle_irq(struct uart_port *p)
 	struct dw8250_data *d = to_dw8250_data(p->private_data);
 	unsigned int iir = p->serial_in(p, UART_IIR);
 	bool rx_timeout = (iir & 0x3f) == UART_IIR_RX_TIMEOUT;
-	unsigned int quirks = d->pdata->quirks;
+	unsigned int quirks = 0;
 	unsigned int status;
 	unsigned long flags;
 
+	if (d->pdata)
+		quirks = d->pdata->quirks;
+
 	/*
 	 * There are ways to get Designware-based UARTs into a state where
 	 * they are asserting UART_IIR_RX_TIMEOUT but there is no actual
-- 
2.35.1