Re: [PATCH v2 1/2] dt-bindings: iio: adc: Add rtq6056 adc support

[Krzysztof Kozlowski]

On 29/06/2022 04:20, cy_huang wrote:
> From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> 
> Add the documentation for Richtek rtq6056.
> 
> Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> ---
> Since v2
> - Change the resistor property name to be generic 'shunt-resistor-micro-ohms'.
> 
> ---
>  .../bindings/iio/adc/richtek,rtq6056.yaml          | 56 ++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
> new file mode 100644
> index 00000000..fe45d8b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
> @@ -0,0 +1,56 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/richtek,rtq6056.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: RTQ6056 Bi-Directional Current and Power Monitor with 16-bit ADC
> +
> +maintainers:
> +  - ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> +
> +description: |
> +  The RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
> +  interface, and the device provides full information for system by reading
> +  out the loading current and power.
> +
> +  The device monitors both of the drops across sense resistor and the BUS
> +  voltage, converts into the current in amperes, and power in watts through
> +  internal analog-to-digital converter ADC. The programmable calibration,
> +  adjustable conversion time, and averaging function are also built in for
> +  more design flexibility.
> +
> +  Datasheet is available at
> +  https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
> +
> +properties:
> +  compatible:
> +    const: richtek,rtq6056
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#io-channel-cells":
> +    const: 1
> +
> +  shunt-resistor-micro-ohms:
> +    description: Shunt IN+/IN- sensing node resistor
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#io-channel-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      rtq6056@40 {

This was not fixed.


Best regards,
Krzysztof