Re: [PATCH v5 4/4] arm64: dts: qcom: sdm845: Add CPU BWMON

[Rajendra Nayak]

On 6/29/2022 1:22 PM, Krzysztof Kozlowski wrote:
> Add device node for CPU-memory BWMON device (bandwidth monitoring) on
> SDM845 measuring bandwidth between CPU (gladiator_noc) and Last Level
> Cache (memnoc).  Usage of this BWMON allows to remove fixed bandwidth
> votes from cpufreq (CPU nodes) thus achieve high memory throughput even
> with lower CPU frequencies.
>
> Co-developed-by: Thara Gopinath <thara.gopinath@xxxxxxxxx>
> Signed-off-by: Thara Gopinath <thara.gopinath@xxxxxxxxx>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/qcom/sdm845.dtsi | 38 ++++++++++++++++++++++++++++
>   1 file changed, 38 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 83e8b63f0910..e0f088996390 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -2026,6 +2026,44 @@ llcc: system-cache-controller@1100000 {
>   			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
>   		};
>   
> +		pmu@1436400 {
> +			compatible = "qcom,sdm845-cpu-bwmon", "qcom,msm8998-cpu-bwmon";
> +			reg = <0 0x01436400 0 0x600>;
> +			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
> +			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>;
> +
> +			operating-points-v2 = <&cpu_bwmon_opp_table>;
> +
> +			cpu_bwmon_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				/*
> +				 * The interconnect paths bandwidths taken from
> +				 * cpu4_opp_table bandwidth.
> +				 * They also match different tables from
> +				 * msm-4.9 downstream kernel:
> +				 *  - the OSM L3 from bandwidth table of
> +				 *    qcom,cpu4-l3lat-mon (qcom,core-dev-table);
> +				 *    bus width: 16 bytes;
> +				 */

Maybe the comment needs an update?

> +				opp-0 {
> +					opp-peak-kBps = <4800000>;
> +				};
> +				opp-1 {
> +					opp-peak-kBps = <9216000>;
> +				};
> +				opp-2 {
> +					opp-peak-kBps = <15052800>;
> +				};
> +				opp-3 {
> +					opp-peak-kBps = <20889600>;
> +				};
> +				opp-4 {
> +					opp-peak-kBps = <25497600>;
> +				};
> +			};
> +		};
> +
>   		pcie0: pci@1c00000 {
>   			compatible = "qcom,pcie-sdm845";
>   			reg = <0 0x01c00000 0 0x2000>,