Re: [PATCH 0/2] BUG, more dw8259 ACPI crashes

[Jeremy Linton]

Hi,

On 6/28/22 19:02, Jeremy Linton wrote:
> 5.19rc4 crashes with:
>
> [    4.441703] Internal error: Oops: 96000004 [#1] SMP
> [    4.446601] Modules linked in:
> [    4.449668] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-0.rc4.33.fc37.aarch64 #1
> [    4.457532] Hardware name: Marvell                         Armada 7k/8k Family Board      /Armada 7k/8k Family Board      , BIOS EDK II Jun  4 2019
> [    4.470800] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [    4.477791] pc : dw8250_handle_irq+0x58/0x190
> [    4.482170] lr : dw8250_handle_irq+0x38/0x190
> [    4.486544] sp : ffff800008003e40
> [    4.489869] x29: ffff800008003e40 x28: ffffbe13be183980 x27: 00000000b46bd3d0
> [    4.497036] x26: ffffbe13bdbc3008 x25: ffff6f1447910f80 x24: ffff6f1447910f94
> [    4.504204] x23: 0000000000000012 x22: ffff6f144218fc80 x21: 0000000000000000
> [    4.511372] x20: 0000000000000007 x19: ffffbe13be7628d0 x18: ffff80000918b528
> [    4.518540] x17: ffffb103c0343000 x16: ffff800008004000 x15: 0000000000004000
> [    4.525706] x14: 0000000000000000 x13: 0000000000000030 x12: 0101010101010101
> [    4.532872] x11: ffffbe13be16f6d8 x10: 0000000000001d90 x9 : ffffbe13bc6b4f0c
> [    4.540040] x8 : ffffbe13be185770 x7 : 0000000000000000 x6 : 00000000296b5f4a
> [    4.547206] x5 : 00ffffffffffffff x4 : 0000000000010002 x3 : ffffbe13be7628d0
> [    4.554373] x2 : 0000000000000007 x1 : 0000000000000000 x0 : 0000000000000000
> [    4.561539] Call trace:
> [    4.563994]  dw8250_handle_irq+0x58/0x190
> [    4.568020]  serial8250_interrupt+0x68/0x140
> [    4.572307]  __handle_irq_event_percpu+0x68/0x230
> [    4.577034]  handle_irq_event+0x58/0x120
> [    4.580973]  handle_fasteoi_irq+0xcc/0x1c4
> [    4.585086]  generic_handle_domain_irq+0x38/0x50
> [    4.589723]  gic_handle_irq+0x50/0xe0
> [    4.593399]  call_on_irq_stack+0x2c/0x38
> [    4.597338]  do_interrupt_handler+0xdc/0xe0
> [    4.601539]  el1_interrupt+0x34/0x70
> [    4.605131]  el1h_64_irq_handler+0x18/0x24
> [    4.609244]  el1h_64_irq+0x68/0x6c
> [    4.612658]  arch_cpu_idle+0x18/0x2c
> [    4.616246]  default_idle_call+0x34/0x18c
> [    4.620273]  cpuidle_idle_call+0x154/0x1a0
> [    4.624388]  do_idle+0xa4/0xf4
> [    4.627455]  cpu_startup_entry+0x34/0x3c
> [    4.631394]  kernel_init+0x0/0x150
> [    4.634808]  arch_post_acpi_subsys_init+0x0/0x30
> [    4.639445]  start_kernel+0x474/0x490
> [    4.643121]  __primary_switched+0xc0/0xc8
> [    4.647148] Code: 7100305f 1a9f17f5 f100003f 7a400aa4 (b9400817)
> [    4.653267] ---[ end trace 0000000000000000 ]---
>
> On an ACPI enabled Mcbin. This is again the result
> of the pdata information not being available on an
> ACPI machine. But since there are multiple commits
> I've broken this into to fixes. The first
> simply reverts the USR register change because it
> should be functionality transparent and I don't
> have a good way to tie ACPI ids to the hardware
> and the second fixes the later patch which uses it
> in the interrupt handler.

Hi,

I missed cd16044d7c38 ("serial: 8250: dw: enable using pdata with ACPI") 
in tty-linus, which fixes this. So please ignore this set, sorry about 
the noise.


Thanks,