[PATCH] ethernet/neterion: fix repeated words in comments

[Jilin Yuan]

Delete the redundant word 'the'.
Delete the redundant word 'a'.
Delete the redundant word 'frame'.
Delete the redundant word 'is'.
Delete the redundant word 'not'.

Signed-off-by: Jilin Yuan <yuanjilin@xxxxxxxxxx>
---
 drivers/net/ethernet/neterion/s2io.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index 6dd451adc331..30f955efa830 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2156,7 +2156,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
 
 	/*
 	 * In PCI 33 mode, the P_PLL is not used, and therefore,
-	 * the the P_PLL_LOCK bit in the adapter_status register will
+	 * the P_PLL_LOCK bit in the adapter_status register will
 	 * not be asserted.
 	 */
 	if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
@@ -3817,7 +3817,7 @@ static irqreturn_t s2io_test_intr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-/* Test interrupt path by forcing a a software IRQ */
+/* Test interrupt path by forcing a software IRQ */
 static int s2io_test_msi(struct s2io_nic *sp)
 {
 	struct pci_dev *pdev = sp->pdev;
@@ -5492,7 +5492,7 @@ s2io_ethtool_gringparam(struct net_device *dev,
 }
 
 /**
- * s2io_ethtool_getpause_data -Pause frame frame generation and reception.
+ * s2io_ethtool_getpause_data -Pause frame generation and reception.
  * @dev: pointer to netdev
  * @ep : pointer to the structure with pause parameters given by ethtool.
  * Description:
@@ -7449,7 +7449,7 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
  *  @link : inidicates whether link is UP/DOWN.
  *  Description:
  *  This function stops/starts the Tx queue depending on whether the link
- *  status of the NIC is is down or up. This is called by the Alarm
+ *  status of the NIC is down or up. This is called by the Alarm
  *  interrupt handler whenever a link change interrupt comes up.
  *  Return value:
  *  void.
@@ -7732,7 +7732,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	 * Setting the device configuration parameters.
 	 * Most of these parameters can be specified by the user during
 	 * module insertion as they are module loadable parameters. If
-	 * these parameters are not not specified during load time, they
+	 * these parameters are not specified during load time, they
 	 * are initialized with default values.
 	 */
 	config = &sp->config;
-- 
2.36.1