Re: [PATCH] FROMLIST: arm64: dts: qcom: Add LTE SKUs for sc7280-villager family

From: Doug Anderson
Date: Thu Jun 30 2022 - 11:03:03 EST

Hi,

On Wed, Jun 29, 2022 at 11:27 PM Jimmy Chen <jinghung.chen3@xxxxxxxxxxx> wrote:
>
> From: Jimmy Chen <jinghung.chen43@xxxxxxxxx>
>
> This adds LTE skus for villager device tree files.
>
> Signed-off-by: Jimmy Chen <jinghung.chen43@xxxxxxxxx>
> Signed-off-by: Jimmy Chen <jinghung.chen3@xxxxxxxxxxx>

Pick one email address and use it. Having two Signed-off-by from the
same person with different email addresses is odd.


> arch/arm64/boot/dts/qcom/Makefile | 3 +++
> .../arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 7 -------
> arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 1 +
> .../qcom/sc7280-herobrine-herobrine-r1-lte.dts | 14 ++++++++++++++
> .../boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 15 +++++++++++++++
> .../dts/qcom/sc7280-herobrine-villager-r0-lte.dts | 14 ++++++++++++++
> .../dts/qcom/sc7280-herobrine-villager-r1-lte.dts | 14 ++++++++++++++
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 1 +
> 8 files changed, 62 insertions(+), 7 deletions(-)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1-lte.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts

NOTE: ${SUBJECT} for this patch has "FROMLIST". Please remove that.
That's a prefix that's added when patches are picked from an upstream
mailing list into a downstream Chrome OS tree.

Also note that we've started updating the "bindings" file for boards.
Please update "Documentation/devicetree/bindings/arm/qcom.yaml" as
part of your series. Ideally that will make it a two-part series.
Patch #1 updates the bindings and patch #2 does the device tree
changes.


> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 2f8aec2cc6db6..ab1066883c468 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -85,7 +85,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0-lte.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> index 9f4a9c263c351..b1f83ddb4e23a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> @@ -83,13 +83,6 @@ spi_flash: flash@0 {
> };
> };
>
> -/* Modem setup is different on Chrome setups than typical Qualcomm setup */
> -&remoteproc_mpss {
> - status = "okay";
> - compatible = "qcom,sc7280-mss-pil";
> - iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
> - memory-region = <&mba_mem>, <&mpss_mem>;
> -};

Please rebase your patch the Qualcomm tree, AKA the "for-next" branch
of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git

...when I applied your patch I got a merge conflict here because
upstream has commit 2a77ada5168a ("arm64: dts: qcom: sc7280: Enable
wifi for Chrome OS boards") and commit 1c20d3dbaa67 ("arm64: dts:
qcom: sc7280: Set modem FW path for Chrome OS boards")


> /* Increase the size from 2.5MB to 8MB */
> &rmtfs_mem {
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> index a4ac33c4fd59a..7aaba5e51af01 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> @@ -8,6 +8,7 @@
> /dts-v1/;
>
> #include "sc7280-herobrine.dtsi"
> +#include "sc7280-herobrine-lte-sku.dtsi"
>
> / {
> model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)";
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1-lte.dts
> new file mode 100644
> index 0000000000000..e37773fd63b3b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1-lte.dts

Thinking about this more, I think we _shouldn't_ do this for
herobrine-r1 right now. No herobrine-r1 boards were actually strapped
to tell LTE vs. non-LTE and people just shoved LTE vs. non-LTE qcards
on randomly.

There is still some plan to have the bootloader identify LTE vs. WiFi
qcards and use a different SKU ID bit, so maybe we'll solve this
eventually. ...but for now leave herobrine alone. Personally for now
I'd suggest adding #include "sc7280-herobrine-lte-sku.dtsi" to the
existing "sc7280-herobrine-herobrine-r1.dts" file.


> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Herobrine board device tree source
> + *
> + * Copyright 2022 Google LLC.
> + */
> +
> +#include "sc7280-herobrine-villager-r0.dts"
> +#include "sc7280-herobrine-lte-sku.dtsi"
> +
> +/{
> + model = "Google Herobrine (rev1+) with LTE";
> + compatible = "google,herobrine-sku0", "qcom,sc7280";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> new file mode 100644
> index 0000000000000..c628910b310d3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> + /*
> + * Google Herobrine dts fragment for LTE SKUs
> + *
> + * Copyright 2022 Google LLC.
> + */

Why is the copyright header comment indented by two spaces? Please fix.

...also please add a blank line here after the header.