[PATCH V2 12/13] PM / devfreq: tegra30: Register config_clks helper

[Viresh Kumar]

There is a corner case with Tegra30, where we want to skip clk
configuration that happens via dev_pm_opp_set_opp(), but still want the
OPP core to read the "opp-hz" property so we can find the right OPP via
freq finding helpers.

The OPP core provides support for the platforms to provide config_clks
helpers now, lets use that instead of devm_pm_opp_of_add_table_noclk()
to achieve the same result, as the OPP core won't parse the DT's
"opp-hz" property anymore if the clock isn't provided.

Tested-by: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
 drivers/devfreq/tegra30-devfreq.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
index 65ecf17a36f4..0e0a4058f45c 100644
--- a/drivers/devfreq/tegra30-devfreq.c
+++ b/drivers/devfreq/tegra30-devfreq.c
@@ -821,6 +821,15 @@ static int devm_tegra_devfreq_init_hw(struct device *dev,
 	return err;
 }
 
+static int tegra_devfreq_config_clks_nop(struct device *dev,
+					 struct opp_table *opp_table,
+					 struct dev_pm_opp *opp, void *data,
+					 bool scaling_down)
+{
+	/* We want to skip clk configuration via dev_pm_opp_set_opp() */
+	return 0;
+}
+
 static int tegra_devfreq_probe(struct platform_device *pdev)
 {
 	u32 hw_version = BIT(tegra_sku_info.soc_speedo_id);
@@ -830,6 +839,13 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
 	unsigned int i;
 	long rate;
 	int err;
+	const char *clk_names[] = { "actmon", NULL };
+	struct dev_pm_opp_config config = {
+		.supported_hw = &hw_version,
+		.supported_hw_count = 1,
+		.clk_names = clk_names,
+		.config_clks = tegra_devfreq_config_clks_nop,
+	};
 
 	tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
 	if (!tegra)
@@ -874,13 +890,13 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
 		return err;
 	}
 
-	err = devm_pm_opp_set_supported_hw(&pdev->dev, &hw_version, 1);
+	err = devm_pm_opp_set_config(&pdev->dev, &config);
 	if (err) {
-		dev_err(&pdev->dev, "Failed to set supported HW: %d\n", err);
+		dev_err(&pdev->dev, "Failed to set OPP config: %d\n", err);
 		return err;
 	}
 
-	err = devm_pm_opp_of_add_table_noclk(&pdev->dev, 0);
+	err = devm_pm_opp_of_add_table_indexed(&pdev->dev, 0);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to add OPP table: %d\n", err);
 		return err;
-- 
2.31.1.272.g89b43f80a514