[PATCH v1 2/2] arm64: dts: imx8mm-verdin: use level interrupt for mcp251xfd

[Andrejs Cainikovs]

Switch to level interrupt for mcp251xfd. This will make sure no
interrupts are lost.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 2841c6bfe3a9..6491e745b3fa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -195,7 +195,7 @@ &ecspi3 {
 	can1: can@0 {
 		compatible = "microchip,mcp251xfd";
 		clocks = <&clk40m>;
-		interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_can1_int>;
 		reg = <0>;
-- 
2.34.1