Re: [PATCH v2 2/2] pinctrl: ocelot: Fix pincfg

From: Colin Foster
Date: Fri Jul 08 2022 - 16:16:14 EST


On Fri, Jul 08, 2022 at 09:55:10PM +0200, Horatiu Vultur wrote:
> The blamed commit changed to use regmaps instead of __iomem. But it
> didn't update the register offsets to be at word offset, so it uses byte
> offset.
> Another issue with the same commit is that it a limit of 32 registers
> which is incorrect. The sparx5 has 64 while lan966x has 77.
>
> Fixes: 076d9e71bcf8 ("pinctrl: ocelot: convert pinctrl to regmap")
> Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
> ---
> drivers/pinctrl/pinctrl-ocelot.c | 13 +++++++++----
> 1 file changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
> index 10787056c5c7..d88d6af71e46 100644
> --- a/drivers/pinctrl/pinctrl-ocelot.c
> +++ b/drivers/pinctrl/pinctrl-ocelot.c
> @@ -1334,7 +1334,9 @@ static int ocelot_hw_get_value(struct ocelot_pinctrl *info,
> if (info->pincfg) {
> u32 regcfg;
>
> - ret = regmap_read(info->pincfg, pin, &regcfg);
> + ret = regmap_read(info->pincfg,
> + pin * regmap_get_reg_stride(info->pincfg),
> + &regcfg);
> if (ret)
> return ret;
>
> @@ -1368,14 +1370,18 @@ static int ocelot_pincfg_clrsetbits(struct ocelot_pinctrl *info, u32 regaddr,
> u32 val;
> int ret;
>
> - ret = regmap_read(info->pincfg, regaddr, &val);
> + ret = regmap_read(info->pincfg,
> + regaddr * regmap_get_reg_stride(info->pincfg),
> + &val);
> if (ret)
> return ret;
>
> val &= ~clrbits;
> val |= setbits;
>
> - ret = regmap_write(info->pincfg, regaddr, val);
> + ret = regmap_write(info->pincfg,
> + regaddr * regmap_get_reg_stride(info->pincfg),
> + val);
>
> return ret;
> }
> @@ -1944,7 +1950,6 @@ static struct regmap *ocelot_pinctrl_create_pincfg(struct platform_device *pdev)
> .reg_bits = 32,
> .val_bits = 32,
> .reg_stride = 4,
> - .max_register = 32,

What happens in /sys/kernel/debug/regmap/*-pincfg/{range,registers} when
there's no max register?


Should it be this?

struct regmap_config regmap_config = {
...
};
regmap_config.max_register = info->desc->npins * regmap_config.reg_stride;

> .name = "pincfg",
> };
>
> --
> 2.33.0
>