[PATCH 11/12] Documentation: x86: Use literal code block for TDX dmesg output

[Bagas Sanjaya]

The dmesg output blocks are using line blocks, which is incorrect, since
this will render the blocks as normal paragraph with preserved line
breaks instead of code blocks.

Use literal code blocks instead for the output.

Fixes: f05f595045dfc7 ("Documentation/x86: Add documentation for TDX host support")
Signed-off-by: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
---
 Documentation/x86/tdx.rst | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/Documentation/x86/tdx.rst b/Documentation/x86/tdx.rst
index 4430912a2e4f05..f5bd22b89159ec 100644
--- a/Documentation/x86/tdx.rst
+++ b/Documentation/x86/tdx.rst
@@ -41,11 +41,11 @@ TDX boot-time detection
 -----------------------
 
 Kernel detects TDX and the TDX private KeyIDs during kernel boot.  User
-can see below dmesg if TDX is enabled by BIOS:
+can see below dmesg if TDX is enabled by BIOS::
 
-|  [..] tdx: SEAMRR enabled.
-|  [..] tdx: TDX private KeyID range: [16, 64).
-|  [..] tdx: TDX enabled by BIOS.
+   [..] tdx: SEAMRR enabled.
+   [..] tdx: TDX private KeyID range: [16, 64).
+   [..] tdx: TDX enabled by BIOS.
 
 TDX module detection and initialization
 ---------------------------------------
@@ -79,20 +79,20 @@ caller.
 User can consult dmesg to see the presence of the TDX module, and whether
 it has been initialized.
 
-If the TDX module is not loaded, dmesg shows below:
+If the TDX module is not loaded, dmesg shows below::
 
-|  [..] tdx: TDX module is not loaded.
+   [..] tdx: TDX module is not loaded.
 
 If the TDX module is initialized successfully, dmesg shows something
-like below:
+like below::
 
-|  [..] tdx: TDX module: vendor_id 0x8086, major_version 1, minor_version 0, build_date 20211209, build_num 160
-|  [..] tdx: 65667 pages allocated for PAMT.
-|  [..] tdx: TDX module initialized.
+   [..] tdx: TDX module: vendor_id 0x8086, major_version 1, minor_version 0, build_date 20211209, build_num 160
+   [..] tdx: 65667 pages allocated for PAMT.
+   [..] tdx: TDX module initialized.
 
-If the TDX module failed to initialize, dmesg shows below:
+If the TDX module failed to initialize, dmesg shows below::
 
-|  [..] tdx: Failed to initialize TDX module.  Shut it down.
+   [..] tdx: Failed to initialize TDX module.  Shut it down.
 
 TDX Interaction to Other Kernel Components
 ------------------------------------------
@@ -143,10 +143,10 @@ There are basically two memory hot-add cases that need to be prevented:
 ACPI memory hot-add and driver managed memory hot-add.  The kernel
 rejectes the driver managed memory hot-add too when TDX is enabled by
 BIOS.  For instance, dmesg shows below error when using kmem driver to
-add a legacy PMEM as system RAM:
+add a legacy PMEM as system RAM::
 
-|  [..] tdx: Unable to add memory [0x580000000, 0x600000000) on TDX enabled platform.
-|  [..] kmem dax0.0: mapping0: 0x580000000-0x5ffffffff memory add failed
+   [..] tdx: Unable to add memory [0x580000000, 0x600000000) on TDX enabled platform.
+   [..] kmem dax0.0: mapping0: 0x580000000-0x5ffffffff memory add failed
 
 However, adding new memory to ZONE_DEVICE should not be prevented as
 those pages are not managed by the page allocator.  Therefore,
-- 
An old man doll... just what I always wanted! - Clara