[PATCH v12 1/2] dt-bindings: vcpu_stall_detector: Add qemu,vcpu-stall-detector compatible

[Sebastian Ene]

The VCPU stall detection mechanism allows to configure the expiration
duration and the internal counter clock frequency measured in Hz.
Add these properties in the schema.

While this is a memory mapped virtual device, it is expected to be loaded
when the DT contains the compatible: "qemu,vcpu-stall-detector" node.
In a protected VM we trust the generated DT nodes and we don't rely on
the host to present the hardware peripherals.

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Sebastian Ene <sebastianene@xxxxxxxxxx>
---
 .../misc/qemu,vcpu-stall-detector.yaml        | 51 +++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml

diff --git a/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml b/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml
new file mode 100644
index 000000000000..1aebeb696ee0
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/qemu,vcpu-stall-detector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VCPU stall detector
+
+description:
+  This binding describes a CPU stall detector mechanism for virtual CPUs
+  which is accessed through MMIO.
+
+maintainers:
+  - Sebastian Ene <sebastianene@xxxxxxxxxx>
+
+properties:
+  compatible:
+    enum:
+      - qemu,vcpu-stall-detector
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The internal clock of the stall detector peripheral measure in Hz used
+      to decrement its internal counter register on each tick.
+      Defaults to 10 if unset.
+    default: 10
+
+  timeout-sec:
+    description: |
+      The stall detector expiration timeout measured in seconds.
+      Defaults to 8 if unset. Please note that it also takes into account the
+      time spent while the VCPU is not running.
+    default: 8
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    vmwdt@9030000 {
+      compatible = "qemu,vcpu-stall-detector";
+      reg = <0x9030000 0x10000>;
+      clock-frequency = <10>;
+      timeout-sec = <8>;
+    };
-- 
2.37.0.rc0.161.g10f37bed90-goog