[PATCH RESEND] crypto: qat - fix indentation in ABI documentation

From: Giovanni Cabiddu
Date: Mon Jul 11 2022 - 14:01:53 EST


On Mon, Jul 11, 2022 at 05:29:52PM +0100, Giovanni Cabiddu wrote:
> Resending including linux-crypto. Apologies for the duplicate.
Ouch, now I see that it didn't get picked up by
https://patchwork.kernel.org/project/linux-crypto/list/.
Re-sending again, now with the correct subject. Apologies.

----8<----

From: Giovanni Cabiddu <giovanni.cabiddu@xxxxxxxxx>
Date: Mon, 11 Jul 2022 16:18:43 +0100
Subject: [PATCH] crypto: qat - fix indentation in ABI documentation
Organization: Intel Research and Development Ireland Ltd - Co. Reg. #308263 - Collinstown Industrial Park, Leixlip, County Kildare - Ireland

Change the indentation in the file sysfs-driver-qat to resolve the
following warning when generating documentation with `make htmldocs`:

Documentation/ABI/testing/sysfs-driver-qat:24: WARNING: Unexpected indentation.

Fixes: d4cfb144f605 ("crypto: qat - expose device config through sysfs for 4xxx")
Reported-by: kernel test robot <lkp@xxxxxxxxx>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@xxxxxxxxx>
---
Documentation/ABI/testing/sysfs-driver-qat | 38 ++++++++++------------
1 file changed, 17 insertions(+), 21 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-qat b/Documentation/ABI/testing/sysfs-driver-qat
index a600531e9562..741d97fa5ae1 100644
--- a/Documentation/ABI/testing/sysfs-driver-qat
+++ b/Documentation/ABI/testing/sysfs-driver-qat
@@ -8,12 +8,12 @@ Description: Reports the current state of the QAT device and allows to
This attribute is RW.

Returned values:
- up: the device is up and running
- down: the device is down
+ up: the device is up and running
+ down: the device is down

Allowed values:
- up: initialize and start the device
- down: stop the device and bring it down
+ up: initialize and start the device
+ down: stop the device and bring it down

It is possible to transition the device from up to down only
if the device is up and vice versa.
@@ -30,16 +30,12 @@ Description: Reports the current configuration of the QAT device and allows
This attribute is RW.

Returned values:
- sym;asym: the device is configured for running
- crypto services
- dc: the device is configured for running
- compression services
+ sym;asym: the device is configured for running crypto services
+ dc: the device is configured for running compression services

Allowed values:
- sym;asym: configure the device for running
- crypto services
- dc: configure the device for running
- compression services
+ sym;asym: configure the device for running crypto services
+ dc: configure the device for running compression services

It is possible to set the configuration only if the device
is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state)
@@ -47,14 +43,14 @@ Description: Reports the current configuration of the QAT device and allows
The following example shows how to change the configuration of
a device configured for running crypto services in order to
run data compression:
- # cat /sys/bus/pci/devices/<BDF>/qat/state
- up
- # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
- sym;asym
- # echo down > /sys/bus/pci/devices/<BDF>/qat/state
- # echo dc > /sys/bus/pci/devices/<BDF>/qat/cfg_services
- # echo up > /sys/bus/pci/devices/<BDF>/qat/state
- # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
- dc
+ # cat /sys/bus/pci/devices/<BDF>/qat/state
+ up
+ # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
+ sym;asym
+ # echo down > /sys/bus/pci/devices/<BDF>/qat/state
+ # echo dc > /sys/bus/pci/devices/<BDF>/qat/cfg_services
+ # echo up > /sys/bus/pci/devices/<BDF>/qat/state
+ # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
+ dc

This attribute is only available for qat_4xxx devices.
--
2.36.1