[PATCH v14 01/10] dt-bindings: mediatek,dp: Add Display Port binding

From: Bo-Chen Chen
Date: Tue Jul 12 2022 - 07:12:59 EST


From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>

This controller is present on several mediatek hardware. Currently
mt8195 and mt8395 have this controller without a functional difference,
so only one compatible field is added.

The controller can have two forms, as a normal display port and as an
embedded display port.

Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@xxxxxxxxxxxx>
---
.../display/mediatek/mediatek,dp.yaml | 115 ++++++++++++++++++
1 file changed, 115 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
new file mode 100644
index 000000000000..e2d6cb314297
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Display Port Controller
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx>
+ - Jitao shi <jitao.shi@xxxxxxxxxxxx>
+
+description: |
+ Device tree bindings for the MediaTek display port TX (DP) and
+ embedded display port TX (eDP) controller present on some MediaTek SoCs.
+ MediaTek DP and eDP are different hardwares and they have different
+ base address for registers, so we need two different compatibles to
+ separate them.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt8195-dp-tx
+ - mediatek,mt8195-edp-tx
+
+ reg:
+ maxItems: 1
+
+ nvmem-cells:
+ maxItems: 1
+ description: efuse data for display port calibration
+
+ nvmem-cell-names:
+ const: dp_calibration_data
+
+ power-domains:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input endpoint of the controller, usually dp_intf
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: Output endpoint of the controller
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+ properties:
+ data-lanes:
+ description: |
+ number of lanes supported by the hardware.
+ The possible values:
+ 0 - For 1 lane enabled in IP.
+ 0 1 - For 2 lanes enabled in IP.
+ 0 1 2 3 - For 4 lanes enabled in IP.
+ minItems: 1
+ maxItems: 4
+ required:
+ - data-lanes
+
+ required:
+ - port@0
+ - port@1
+
+ max-linkrate-mhz:
+ enum: [ 1620, 2700, 5400, 8100 ]
+ description: maximum link rate supported by the hardware.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - ports
+ - max-linkrate-mhz
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/mt8195-power.h>
+ dp_tx@1c600000 {
+ compatible = "mediatek,mt8195-dp-tx";
+ reg = <0x1c600000 0x8000>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>;
+ interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+ max-linkrate-mhz = <8100>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dptx_in: endpoint {
+ remote-endpoint = <&dp_intf0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ dptx_out: endpoint {
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+ };
--
2.18.0