[net 0/3] seg6: fix skb checksum for SRH encapsulation/insertion

From: Andrea Mayer
Date: Tue Jul 12 2022 - 14:00:18 EST

The Linux kernel supports Segment Routing Header (SRH)
encapsulation/insertion operations by providing the capability to: i)
encapsulate a packet in an outer IPv6 header with a specified SRH; ii)
insert a specified SRH directly after the IPv6 header of the packet.
Note that the insertion operation is also referred to as 'injection'.

The two operations are respectively supported by seg6_do_srh_encap() and
seg6_do_srh_inline(), which operate on the skb associated to the packet as
needed (e.g. adding the necessary headers and initializing them, while
taking care to recalculate the skb checksum).

seg6_do_srh_encap() and seg6_do_srh_inline() do not initialize the payload
length of the IPv6 header, which is carried out by the caller functions.
However, this approach causes the corruption of the skb checksum which
needs to be updated only after initialization of headers is completed
(thanks to Paolo Abeni for detecting this issue).

The patchset fixes the skb checksum corruption by moving the IPv6 header
payload length initialization from the callers of seg6_do_srh_encap() and
seg6_do_srh_inline() directly into these functions.

This patchset is organized as follows:
- patch 1/3, seg6: fix skb checksum evaluation in SRH
(* SRH encapsulation/insertion available since v4.10)

- patch 2/3, seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps
(* SRv6 End.B6 and End.B6.Encaps behaviors available since v4.14)

- patch 3/3, seg6: bpf: fix skb checksum in bpf_push_seg6_encap();
(* bpf IPv6 Segment Routing helpers available since v4.18)

Thank you all,

Andrea Mayer (3):
seg6: fix skb checksum evaluation in SRH encapsulation/insertion
seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors
seg6: bpf: fix skb checksum in bpf_push_seg6_encap()

net/core/filter.c | 1 -
net/ipv6/seg6_iptunnel.c | 5 ++++-
net/ipv6/seg6_local.c | 2 --
3 files changed, 4 insertions(+), 4 deletions(-)