Re: [PATCH 2/5] arm64: dts: qcom: sdm845-xiaomi-beryllium-common: generalize the display panel node

[Bjorn Andersson]

On Fri 08 Jul 06:12 CDT 2022, Joel Selvaraj wrote:

> Make the display panel nodes generic. The tianma and ebbg variant will
> set the compatabile property as per the display model they use.
> 
> Signed-off-by: Joel Selvaraj <jo@xxxxxxxxxxx>
> ---
>  .../boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi     | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
> index d88dc07205f7..634999cf8987 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
> @@ -221,8 +221,8 @@ &dsi0 {
>  	status = "okay";
>  	vdda-supply = <&vreg_l26a_1p2>;
>  
> -	panel@0 {
> -		compatible = "tianma,fhd-video";
> +	display_panel: panel@0 {
> +		status = "disabled";

Please make "status" the last property defined in the node. Same comment
on the next 2 patches.

Thanks,
Bjorn

>  		reg = <0>;
>  		vddio-supply = <&vreg_l14a_1p8>;
>  		vddpos-supply = <&lab>;
> @@ -235,7 +235,7 @@ panel@0 {
>  		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
>  
>  		port {
> -			tianma_nt36672a_in_0: endpoint {
> +			panel_in_0: endpoint {
>  				remote-endpoint = <&dsi0_out>;
>  			};
>  		};
> @@ -243,7 +243,7 @@ tianma_nt36672a_in_0: endpoint {
>  };
>  
>  &dsi0_out {
> -	remote-endpoint = <&tianma_nt36672a_in_0>;
> +	remote-endpoint = <&panel_in_0>;
>  	data-lanes = <0 1 2 3>;
>  };
>  
> -- 
> 2.36.1
>