[PATCH v2 4/6] gpiolib: cdev: simplify line event identification

From: Kent Gibson
Date: Wed Jul 13 2022 - 22:04:29 EST


Reorganise line event identification code to reduce code duplication,
and replace if-else initializers with a helper function to improve
readability.

Signed-off-by: Kent Gibson <warthog618@xxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
---
drivers/gpio/gpiolib-cdev.c | 44 +++++++++++++------------------------
1 file changed, 15 insertions(+), 29 deletions(-)

diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index bc7c8822ede0..5765379f4b54 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -569,6 +569,12 @@ static u64 line_event_timestamp(struct line *line)
return ktime_get_ns();
}

+static u32 line_event_id(int level)
+{
+ return level ? GPIO_V2_LINE_EVENT_RISING_EDGE :
+ GPIO_V2_LINE_EVENT_FALLING_EDGE;
+}
+
static enum hte_return process_hw_ts_thread(void *p)
{
struct line *line;
@@ -590,26 +596,19 @@ static enum hte_return process_hw_ts_thread(void *p)

switch (eflags) {
case GPIO_V2_LINE_FLAG_EDGE_BOTH:
- if (line->raw_level >= 0) {
- if (test_bit(FLAG_ACTIVE_LOW, &line->desc->flags))
- level = !line->raw_level;
- else
- level = line->raw_level;
- } else {
- level = gpiod_get_value_cansleep(line->desc);
- }
+ level = (line->raw_level >= 0) ?
+ line->raw_level :
+ gpiod_get_raw_value_cansleep(line->desc);

- if (level)
- le.id = GPIO_V2_LINE_EVENT_RISING_EDGE;
- else
- le.id = GPIO_V2_LINE_EVENT_FALLING_EDGE;
+ if (test_bit(FLAG_ACTIVE_LOW, &line->desc->flags))
+ level = !level;
+
+ le.id = line_event_id(level);
break;
case GPIO_V2_LINE_FLAG_EDGE_RISING:
- /* Emit low-to-high event */
le.id = GPIO_V2_LINE_EVENT_RISING_EDGE;
break;
case GPIO_V2_LINE_FLAG_EDGE_FALLING:
- /* Emit high-to-low event */
le.id = GPIO_V2_LINE_EVENT_FALLING_EDGE;
break;
default:
@@ -684,20 +683,12 @@ static irqreturn_t edge_irq_thread(int irq, void *p)

switch (READ_ONCE(line->eflags)) {
case GPIO_V2_LINE_FLAG_EDGE_BOTH:
- if (gpiod_get_value_cansleep(line->desc))
- /* Emit low-to-high event */
- le.id = GPIO_V2_LINE_EVENT_RISING_EDGE;
- else
- /* Emit high-to-low event */
- le.id = GPIO_V2_LINE_EVENT_FALLING_EDGE;
-
+ le.id = line_event_id(gpiod_get_value_cansleep(line->desc));
break;
case GPIO_V2_LINE_FLAG_EDGE_RISING:
- /* Emit low-to-high event */
le.id = GPIO_V2_LINE_EVENT_RISING_EDGE;
break;
case GPIO_V2_LINE_FLAG_EDGE_FALLING:
- /* Emit high-to-low event */
le.id = GPIO_V2_LINE_EVENT_FALLING_EDGE;
break;
default:
@@ -821,12 +812,7 @@ static void debounce_work_func(struct work_struct *work)
le.line_seqno : atomic_inc_return(&lr->seqno);
}

- if (level)
- /* Emit low-to-high event */
- le.id = GPIO_V2_LINE_EVENT_RISING_EDGE;
- else
- /* Emit high-to-low event */
- le.id = GPIO_V2_LINE_EVENT_FALLING_EDGE;
+ le.id = line_event_id(level);

linereq_put_event(lr, &le);
}
--
2.37.1