[PATCH v2 1/3] drm/bridge: it6505: Modified power sequence

[allen]

From: allen chen <allen.chen@xxxxxxxxxx>

Change power sequence to meet it6505 data sheet requirement when boot on.

Signed-off-by: Pin-Yen Lin <treapking@xxxxxxxxxxxx>
Signed-off-by: Allen Chen <allen.chen@xxxxxxxxxx>
Reviewed-by: Robert Foss <robert.foss@xxxxxxxxxx>
---
 drivers/gpu/drm/bridge/ite-it6505.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 2d119e3016b3..aa5e0aa1af85 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -3029,7 +3029,7 @@ static int it6505_init_pdata(struct it6505 *it6505)
 		return PTR_ERR(pdata->ovdd);
 	}
 
-	pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(pdata->gpiod_reset)) {
 		dev_err(dev, "gpiod_reset gpio not found");
 		return PTR_ERR(pdata->gpiod_reset);
-- 
2.25.1