Re: [PATCH v2 0/8] Add ipq806x missing bindings

[Bjorn Andersson]

On Wed 06 Jul 20:09 CDT 2022, Christian Marangi wrote:

> This is a respin of "Multiple addition to ipq8064 dtsi" series
> with major changes and some commit removed.
> 
> This series try to add some of the missing bindings for ipq806x.
> 
> This still lacks of the cpu bindings and all the bindings required
> to scale cpu clk or L2. These will come later as the driver and
> documentation require some changes.
> 
> So for now we try to add bindings that can directly applied without
> making changes to any drivers.
> 
> Changes:
> v2:
> - Dropped "add sic non secure node for ipq8064" (no user found)
> - Dropped "add smem node for ipq8064" (require changes to the driver
>   to remove syscon node and use regs directly, will be added in a
>   different series)
> - Dropped "fix dtc warning for missing #address-cells for ipq8064" (
>   doesn't actually fix any warning)
> - Changed "enable usb phy by default for ipq8064" to disable usb phy
>   by default
> - Reworked rpm smb208 declaration to a saparate dtsi
> - Fixed order with compatible-reg-status
> - Squashed "remove redundant binding from ipq8064 rb3011 dts" with
>   "add multiple missing pin definition for ipq8064" to prevent dtc
>   error.
> - Add review tag for snps patch
> 
> Changes from "Multiple addition to ipq8064 dtsi":
> v3:
> - Fix error in rb3011 dts
> - Add tested-by tag on the entire series
> v2:
> - Added missing patch
> - Added additional gsbi6 spi
> - Added extra description for L2 cache opp
> - Fxied smb208 enabled by default that is problematic for rb3011 devices
> 
> Christian Marangi (8):
>   ARM: dts: qcom: add multiple missing pin definition for ipq8064
>   ARM: dts: qcom: add gsbi6 missing definition for ipq8064
>   ARM: dts: qcom: add specific ipq8064 dtsi with smb208 rpm regulators
>   ARM: dts: qcom: add missing snps,dwmac compatible for gmac ipq8064
>   ARM: dts: qcom: disable usb phy by default for ipq8064
>   ARM: dts: qcom: reduce pci IO size to 64K for ipq8064
>   ARM: dts: qcom: fix and add some missing gsbi node for ipq8064
>   ARM: dts: qcom: add speedbin efuse nvmem node

Please prefix your ipa8064-specific patches with
  "ARM: dts: qcom: ipq8064: ..."

It makes the git history easier to read, so I fixed it up while applying
these.

Thanks,
Bjorn

> 
>  arch/arm/boot/dts/qcom-ipq8064-ap148.dts   |   6 -
>  arch/arm/boot/dts/qcom-ipq8064-rb3011.dts  |   9 --
>  arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi |  37 +++++
>  arch/arm/boot/dts/qcom-ipq8064.dtsi        | 150 +++++++++++++++++++--
>  4 files changed, 179 insertions(+), 23 deletions(-)
>  create mode 100644 arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
> 
> -- 
> 2.36.1
>