Re: [PATCH] hwmon: (aquacomputer_d5next) Add D5 Next fan control support

[Aleksa Savic]

On Sun, Jul 17, 2022 at 09:14:13AM -0700, Guenter Roeck wrote:
> On 7/17/22 08:41, Aleksa Savic wrote:
> > Define pump and fan speed register offsets in
> > D5 Next control report, as well as its size, to expose PWM fan control.
> > 
> > Signed-off-by: Jack Doan <me@xxxxxxxxxxxx>
> > Signed-off-by: Aleksa Savic <savicaleksa83@xxxxxxxxx>
> 
> This suggests that Jack Doan was the author of this patch, not
> Aleksa Savic. However, that is not reflected in the patch itself.
> Please either use Originally-from: instead of Signed-off-by:
> or make sure that the original author is listed correctly.
> 
> Thanks,
> Guenter
>

Thanks for the clarification. I'll send a v2.

Aleksa

> > ---
> >   drivers/hwmon/aquacomputer_d5next.c | 6 ++++++
> >   1 file changed, 6 insertions(+)
> > 
> > diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
> > index 0e56cc711a26..997d72ea6182 100644
> > --- a/drivers/hwmon/aquacomputer_d5next.c
> > +++ b/drivers/hwmon/aquacomputer_d5next.c
> > @@ -71,8 +71,12 @@ static u8 secondary_ctrl_report[] = {
> >   #define D5NEXT_PUMP_OFFSET		0x6c
> >   #define D5NEXT_FAN_OFFSET		0x5f
> >   #define D5NEXT_5V_VOLTAGE		0x39
> > +#define D5NEXT_CTRL_REPORT_SIZE		0x329
> >   static u8 d5next_sensor_fan_offsets[] = { D5NEXT_PUMP_OFFSET, D5NEXT_FAN_OFFSET };
> > +/* Pump and fan speed registers in D5 Next control report (from 0-100%) */
> > +static u16 d5next_ctrl_fan_offsets[] = { 0x97, 0x42 };
> > +
> >   /* Register offsets for the Farbwerk RGB controller */
> >   #define FARBWERK_NUM_SENSORS		4
> >   #define FARBWERK_SENSOR_START		0x2f
> > @@ -667,9 +671,11 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
> >   		priv->num_fans = D5NEXT_NUM_FANS;
> >   		priv->fan_sensor_offsets = d5next_sensor_fan_offsets;
> > +		priv->fan_ctrl_offsets = d5next_ctrl_fan_offsets;
> >   		priv->num_temp_sensors = D5NEXT_NUM_SENSORS;
> >   		priv->temp_sensor_start_offset = D5NEXT_COOLANT_TEMP;
> >   		priv->power_cycle_count_offset = D5NEXT_POWER_CYCLES;
> > +		priv->buffer_size = D5NEXT_CTRL_REPORT_SIZE;
> >   		priv->temp_label = label_d5next_temp;
> >   		priv->speed_label = label_d5next_speeds;
>