Re: [PATCH] USB: usb-serial-simple: add new device id for OPPO R11

[Yan Xinyu]

> On Jul 17, 2022, at 23:48, Reinhard Speyerer <rspmn@xxxxxxxx> wrote:
> 
> Hi Yan,
> 
> On Sat, Jul 16, 2022 at 09:36:27PM +0800, sdlyyxy wrote:
>> Hi Reinhard,
>> 
>>> On Jul 16, 2022, at 20:13, Reinhard Speyerer <rspmn@xxxxxxxx> wrote:
>>> 
>>> On Fri, Jul 15, 2022 at 10:59:13PM +0800, sdlyyxy wrote:
>>>> 
>>>>> On Jul 15, 2022, at 22:24, Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
>>>>> 
>>>>> The Oppo R11 diagnostic USB connection needs to be bound to the
>>>>> usb-serial-simple driver as it just wants to use a dumb pipe to
>>>>> communicate to the host.
>>>>> 
>>>>> usb-devices output:
>>>>> T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
>>>>> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
>>>>> P: Vendor=22d9 ProdID=276c Rev=04.04
>>>>> S: Manufacturer=OPPO
>>>>> S: Product=SDM660-MTP _SN:09C6BCA7
>>>>> S: SerialNumber=beb2c403
>>>>> C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
>>>>> I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30
>>>>> 
>>>>> Reported-by: Yan Xinyu <sdlyyxy@xxxxxxxxxxx>
>>>>> Cc: Johan Hovold <johan@xxxxxxxxxx>
>>>>> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
>>>>> ---
>>>>> drivers/usb/serial/usb-serial-simple.c | 4 +++-
>>>>> 1 file changed, 3 insertions(+), 1 deletion(-)
>>>>> 
>>>>> diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
>>>>> index 4c6747889a19..eb832b94aa3a 100644
>>>>> --- a/drivers/usb/serial/usb-serial-simple.c
>>>>> +++ b/drivers/usb/serial/usb-serial-simple.c
>>>>> @@ -60,7 +60,9 @@ DEVICE(flashloader, FLASHLOADER_IDS);
>>>>> 	{ USB_VENDOR_AND_INTERFACE_INFO(0x18d1,			\
>>>>> 					USB_CLASS_VENDOR_SPEC,	\
>>>>> 					0x50,			\
>>>>> -					0x01) }
>>>>> +					0x01) },		\
>>>>> +	{ USB_DEVICE_AND_INTERFACE_INFO(0x22d9, 0x276c,		\
>>>>> +					0xff, 0xff, 0x30) }
>>>>> DEVICE(google, GOOGLE_IDS);
>>>>> 
>>>>> /* Libtransistor USB console */
>>>>> -- 
>>>>> 2.37.1
>>>> Tested-by: Yan Xinyu <sdlyyxy@xxxxxxxxxxx>
>>> 
>>> While this may work sufficiently well for real low-volume diag traffic I'd
>>> expect a significant percentage of diag messages to be lost in practice
>>> with the usb-serial-simple driver.
>>> 
>>> According to the usb-devices output this looks like the Qualcomm USB gadget
>>> in the DIAG + ADB composition to me.
>>> 
>>> Since the option driver uses the usb-wwan framework my suggestion would be
>>> for the original patch to be applied instead similar to what has been done
>>> e.g. for the Quectel RM500Q diag port.
>>> 
>>> Regards,
>>> Reinhard
>>> 
>> I tested the diag port using two userspace programs: QCSuper[1] 
>> and scat[2]. Both option and usb-serial-simple drivers generate
>> similar output, so I cannot comfirm diag message loss. Do you
>> have any test method suggestions to generate high-volume diag 
>> traffic and detect message loss?
>> 
> 
> in my experience activating all message logs on the device with a
> mask value like 0xf or 0x1f is a good way to generate more diag traffic.
> Please refer to https://source.codeaurora.org/quic/imm/imm/sources/diag
> (DIAG_CMD_OP_SET_ALL_MSG_MASK) for details.
> 
> Regards,
> Reinhard
> 

Thank you very much for your advice! I'll try to understand the diag
protocol and experiment with different USB drivers to figure out their
difference :)

Regards,
sdlyyxy