Re: [PATCH rcu 4/7] rcu/nocb: Add an option to offload all CPUs on boot

[Neeraj Upadhyay]

On 6/21/2022 4:15 AM, Paul E. McKenney wrote:
> From: Joel Fernandes <joel@xxxxxxxxxxxxxxxxx>
>
> Systems built with CONFIG_RCU_NOCB_CPU=y but booted without either
> the rcu_nocbs= or rcu_nohz_full= kernel-boot parameters will not have
> callback offloading on any of the CPUs, nor can any of the CPUs be
> switched to enable callback offloading at runtime.  Although this is
> intentional, it would be nice to have a way to offload all the CPUs
> without having to make random bootloaders specify either the rcu_nocbs=
> or the rcu_nohz_full= kernel-boot parameters.
>
> This commit therefore provides a new CONFIG_RCU_NOCB_CPU_DEFAULT_ALL
> Kconfig option that switches the default so as to offload callback
> processing on all of the CPUs.  This default can still be overridden
> using the rcu_nocbs= and rcu_nohz_full= kernel-boot parameters.
>
> Reviewed-by: Kalesh Singh <kaleshsingh@xxxxxxxxxx>
> Reviewed-by: Uladzislau Rezki <urezki@xxxxxxxxx>
> (In v4.1, fixed issues with CONFIG maze reported by kernel test robot).
> Reported-by: kernel test robot <lkp@xxxxxxxxx>
> Signed-off-by: Joel Fernandes <joel@xxxxxxxxxxxxxxxxx>
> Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxx>
> ---


Reviewed-by: Neeraj Upadhyay <quic_neeraju@xxxxxxxxxxx>

One query on cpumask_setall() below

>   Documentation/admin-guide/kernel-parameters.txt |  6 ++++++
>   kernel/rcu/Kconfig                              | 13 +++++++++++++
>   kernel/rcu/tree_nocb.h                          | 15 ++++++++++++++-
>   3 files changed, 33 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 2522b11e593f2..34605c275294c 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -3659,6 +3659,9 @@
>   			just as if they had also been called out in the
>   			rcu_nocbs= boot parameter.
>   
> +			Note that this argument takes precedence over
> +			the CONFIG_RCU_NOCB_CPU_DEFAULT_ALL option.
> +
>   	noiotrap	[SH] Disables trapped I/O port accesses.
>   
>   	noirqdebug	[X86-32] Disables the code which attempts to detect and
> @@ -4557,6 +4560,9 @@
>   			no-callback mode from boot but the mode may be
>   			toggled at runtime via cpusets.
>   
> +			Note that this argument takes precedence over
> +			the CONFIG_RCU_NOCB_CPU_DEFAULT_ALL option.
> +
>   	rcu_nocb_poll	[KNL]
>   			Rather than requiring that offloaded CPUs
>   			(specified by rcu_nocbs= above) explicitly
> diff --git a/kernel/rcu/Kconfig b/kernel/rcu/Kconfig
> index 1c630e573548d..27aab870ae4cf 100644
> --- a/kernel/rcu/Kconfig
> +++ b/kernel/rcu/Kconfig
> @@ -262,6 +262,19 @@ config RCU_NOCB_CPU
>   	  Say Y here if you need reduced OS jitter, despite added overhead.
>   	  Say N here if you are unsure.
>   
> +config RCU_NOCB_CPU_DEFAULT_ALL
> +	bool "Offload RCU callback processing from all CPUs by default"
> +	depends on RCU_NOCB_CPU
> +	default n
> +	help
> +	  Use this option to offload callback processing from all CPUs
> +	  by default, in the absence of the rcu_nocbs or nohz_full boot
> +	  parameter. This also avoids the need to use any boot parameters
> +	  to achieve the effect of offloading all CPUs on boot.
> +
> +	  Say Y here if you want offload all CPUs by default on boot.
> +	  Say N here if you are unsure.
> +
>   config TASKS_TRACE_RCU_READ_MB
>   	bool "Tasks Trace RCU readers use memory barriers in user and idle"
>   	depends on RCU_EXPERT && TASKS_TRACE_RCU
> diff --git a/kernel/rcu/tree_nocb.h b/kernel/rcu/tree_nocb.h
> index 4cf9a29bba79d..60cc92cc66552 100644
> --- a/kernel/rcu/tree_nocb.h
> +++ b/kernel/rcu/tree_nocb.h
> @@ -1197,11 +1197,21 @@ void __init rcu_init_nohz(void)
>   {
>   	int cpu;
>   	bool need_rcu_nocb_mask = false;
> +	bool offload_all = false;
>   	struct rcu_data *rdp;
>   
> +#if defined(CONFIG_RCU_NOCB_CPU_DEFAULT_ALL)
> +	if (!rcu_state.nocb_is_setup) {
> +		need_rcu_nocb_mask = true;
> +		offload_all = true;
> +	}
> +#endif /* #if defined(CONFIG_RCU_NOCB_CPU_DEFAULT_ALL) */
> +
>   #if defined(CONFIG_NO_HZ_FULL)
> -	if (tick_nohz_full_running && !cpumask_empty(tick_nohz_full_mask))
> +	if (tick_nohz_full_running && !cpumask_empty(tick_nohz_full_mask)) {
>   		need_rcu_nocb_mask = true;
> +		offload_all = false; /* NO_HZ_FULL has its own mask. */
> +	}
>   #endif /* #if defined(CONFIG_NO_HZ_FULL) */
>   
>   	if (need_rcu_nocb_mask) {
> @@ -1222,6 +1232,9 @@ void __init rcu_init_nohz(void)
>   		cpumask_or(rcu_nocb_mask, rcu_nocb_mask, tick_nohz_full_mask);
>   #endif /* #if defined(CONFIG_NO_HZ_FULL) */
>   
> +	if (offload_all)
> +		cpumask_setall(rcu_nocb_mask);

Do we need to do a cpumask_and(rcu_nocb_mask, cpu_possible_mask, 
rcu_nocb_mask) after setting all cpus in rcu_nocb_mask (cpumask_subset() 
check below takes care of it though)?


Thanks
Neeraj

> +
>   	if (!cpumask_subset(rcu_nocb_mask, cpu_possible_mask)) {
>   		pr_info("\tNote: kernel parameter 'rcu_nocbs=', 'nohz_full', or 'isolcpus=' contains nonexistent CPUs.\n");
>   		cpumask_and(rcu_nocb_mask, cpu_possible_mask,