[PATCH 0/2] MT8195: Add reset for T-PHY (usb/pcie)

[AngeloGioacchino Del Regno]

Add the resets for TPHY Port 1 which, depending on the board layout,
is used either as USB or PCIe PHY.

This is required on MT8195 Tomato Chromebooks for correct initialization
of the secondary PCI-Express controller, where we have a MT7621 PCIe
WiFi chip.

For reference, the PCIe1 controller devicetree node resets will look
like this:

pcie@112f8000 {
	... blurb ...

	resets = <&infracfg_ao MT8195_INFRA_RST2_USBSIF_P1_SWRST>,
		 <&infracfg_ao MT8195_INFRA_RST2_PCIE_P1_SWRST>;
	reset-names = "phy", "mac";

	... blurb ...
};

This series depends on an earlier one where I introduce the MAC
resets for both PCIe (p0, p1) controllers [1]

[1]: https://patchwork.kernel.org/project/linux-mediatek/list/?series=654980

AngeloGioacchino Del Regno (2):
  dt-bindings: reset: mt8195: Add resets for USB/PCIe t-phy port 1
  clk: mediatek: mt8195: Add reset idx for USB/PCIe T-PHY

 drivers/clk/mediatek/clk-mt8195-infra_ao.c | 1 +
 include/dt-bindings/reset/mt8195-resets.h  | 1 +
 2 files changed, 2 insertions(+)

-- 
2.35.1