Re: [PATCH v2 3/4] thermal: mediatek: control buffer enablement tweaks

From: Matthias Brugger
Date: Thu Jul 21 2022 - 04:58:43 EST




On 20/07/2022 20:18, Amjad Ouled-Ameur wrote:
From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>

Add logic in order to be able to turn on the control buffer on MT8365.
This change now allows to have control buffer support for MTK_THERMAL_V1,
and it allows to define the register offset, and mask used to enable it.

Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
Signed-off-by: Fabien Parent <fparent@xxxxxxxxxxxx>
Reviewed-by: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx>
Tested-by: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx>

Here we will need your Signed-off-by as you are sending the patch :)

Regards,
Matthias

---
drivers/thermal/mtk_thermal.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 216eb0d61c5b..1dc276f8c4f1 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -283,6 +283,9 @@ struct mtk_thermal_data {
bool need_switch_bank;
struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
enum mtk_thermal_version version;
+ u32 apmixed_buffer_ctl_reg;
+ u32 apmixed_buffer_ctl_mask;
+ u32 apmixed_buffer_ctl_set;
};
struct mtk_thermal {
@@ -578,6 +581,9 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
.adcpnp = mt7622_adcpnp,
.sensor_mux_values = mt7622_mux_values,
.version = MTK_THERMAL_V2,
+ .apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1,
+ .apmixed_buffer_ctl_mask = ~0x37,
+ .apmixed_buffer_ctl_set = 0x1,
};
/*
@@ -1031,14 +1037,18 @@ static const struct of_device_id mtk_thermal_of_match[] = {
};
MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
-static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
+static void mtk_thermal_turn_on_buffer(struct mtk_thermal *mt,
+ void __iomem *apmixed_base)
{
int tmp;
- tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
- tmp &= ~(0x37);
- tmp |= 0x1;
- writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
+ if (!mt->conf->apmixed_buffer_ctl_reg)
+ return;
+
+ tmp = readl(apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
+ tmp &= mt->conf->apmixed_buffer_ctl_mask;
+ tmp |= mt->conf->apmixed_buffer_ctl_set;
+ writel(tmp, apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
udelay(200);
}
@@ -1138,8 +1148,9 @@ static int mtk_thermal_probe(struct platform_device *pdev)
goto err_disable_clk_auxadc;
}
+ mtk_thermal_turn_on_buffer(mt, apmixed_base);
+
if (mt->conf->version == MTK_THERMAL_V2) {
- mtk_thermal_turn_on_buffer(apmixed_base);
mtk_thermal_release_periodic_ts(mt, auxadc_base);
}