[PATCH 1/6] dt-bindings: panel: explicitly list SPI CPHA and CPOL

[Krzysztof Kozlowski]

The spi-cpha and spi-cpol properties are device specific and should be
accepted only if device really needs them.  Explicitly list them in
device bindings in preparation of their removal from generic
spi-peripheral-props.yaml schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 .../bindings/display/panel/lgphilips,lb035q02.yaml   | 10 ++++++++++
 .../bindings/display/panel/samsung,ld9040.yaml       | 10 ++++++++++
 .../bindings/display/panel/samsung,lms380kf01.yaml   | 12 +++++++++---
 .../bindings/display/panel/samsung,lms397kf04.yaml   | 12 +++++++++---
 .../bindings/display/panel/samsung,s6d27a1.yaml      | 12 +++++++++---
 .../bindings/display/panel/sitronix,st7789v.yaml     | 10 ++++++++++
 .../devicetree/bindings/display/panel/tpo,td.yaml    | 10 ++++++++++
 7 files changed, 67 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
index 5e4e0e552c2f..0bd7bbad5b94 100644
--- a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
+++ b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
@@ -21,6 +21,16 @@ properties:
   enable-gpios: true
   port: true
 
+  spi-cpha:
+    type: boolean
+    description:
+      The device requires shifted clock phase (CPHA) mode.
+
+  spi-cpol:
+    type: boolean
+    description:
+      The device requires inverse clock polarity (CPOL) mode.
+
 required:
   - compatible
   - enable-gpios
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
index d525165d6d63..ee6a61549916 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
@@ -42,6 +42,16 @@ properties:
   panel-height-mm:
     description: physical panel height [mm]
 
+  spi-cpha:
+    type: boolean
+    description:
+      The device requires shifted clock phase (CPHA) mode.
+
+  spi-cpol:
+    type: boolean
+    description:
+      The device requires inverse clock polarity (CPOL) mode.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
index 251f0c7115aa..7f010cb4aa20 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
@@ -43,9 +43,15 @@ properties:
 
   backlight: true
 
-  spi-cpha: true
-
-  spi-cpol: true
+  spi-cpha:
+    type: boolean
+    description:
+      The device requires shifted clock phase (CPHA) mode.
+
+  spi-cpol:
+    type: boolean
+    description:
+      The device requires inverse clock polarity (CPOL) mode.
 
   spi-max-frequency:
     maximum: 1200000
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
index cd62968426fb..794da8b45896 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
@@ -33,9 +33,15 @@ properties:
 
   backlight: true
 
-  spi-cpha: true
-
-  spi-cpol: true
+  spi-cpha:
+    type: boolean
+    description:
+      The device requires shifted clock phase (CPHA) mode.
+
+  spi-cpol:
+    type: boolean
+    description:
+      The device requires inverse clock polarity (CPOL) mode.
 
   spi-max-frequency:
     description: inherited as a SPI client node, the datasheet specifies
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
index 26e3c820a2f7..468111b1a1b4 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
@@ -41,9 +41,15 @@ properties:
 
   backlight: true
 
-  spi-cpha: true
-
-  spi-cpol: true
+  spi-cpha:
+    type: boolean
+    description:
+      The device requires shifted clock phase (CPHA) mode.
+
+  spi-cpol:
+    type: boolean
+    description:
+      The device requires inverse clock polarity (CPOL) mode.
 
   spi-max-frequency:
     maximum: 1200000
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
index 9e1d707c2ace..0eea7de51689 100644
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
@@ -23,6 +23,16 @@ properties:
   backlight: true
   port: true
 
+  spi-cpha:
+    type: boolean
+    description:
+      The device requires shifted clock phase (CPHA) mode.
+
+  spi-cpol:
+    type: boolean
+    description:
+      The device requires inverse clock polarity (CPOL) mode.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
index f902a9d74141..9b0e8659d6bd 100644
--- a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
+++ b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
@@ -28,6 +28,16 @@ properties:
   backlight: true
   port: true
 
+  spi-cpha:
+    type: boolean
+    description:
+      The device requires shifted clock phase (CPHA) mode.
+
+  spi-cpol:
+    type: boolean
+    description:
+      The device requires inverse clock polarity (CPOL) mode.
+
 required:
   - compatible
   - port
-- 
2.34.1