[PATCH] serial: stm32: make info structs static to avoid sparse warnings

[Ben Dooks]

The info structs are local only to the stm32-usart.c driver and are
triggering sparse warnings about being undecalred. Move these into
the main driver code and make them static to avoid the following
warnings:

drivers/tty/serial/stm32-usart.h:42:25: warning: symbol 'stm32f4_info' was not declared. Should it be static?
drivers/tty/serial/stm32-usart.h:63:25: warning: symbol 'stm32f7_info' was not declared. Should it be static?
drivers/tty/serial/stm32-usart.h:85:25: warning: symbol 'stm32h7_info' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@xxxxxxxxx>
---
 drivers/tty/serial/stm32-usart.c | 69 ++++++++++++++++++++++++++++++++
 drivers/tty/serial/stm32-usart.h | 68 -------------------------------
 2 files changed, 69 insertions(+), 68 deletions(-)

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 0973b03eeeaa..01f1ab2c18c0 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -35,6 +35,75 @@
 #include "serial_mctrl_gpio.h"
 #include "stm32-usart.h"
 
+
+/* Register offsets */
+static struct stm32_usart_info stm32f4_info = {
+	.ofs = {
+		.isr	= 0x00,
+		.rdr	= 0x04,
+		.tdr	= 0x04,
+		.brr	= 0x08,
+		.cr1	= 0x0c,
+		.cr2	= 0x10,
+		.cr3	= 0x14,
+		.gtpr	= 0x18,
+		.rtor	= UNDEF_REG,
+		.rqr	= UNDEF_REG,
+		.icr	= UNDEF_REG,
+	},
+	.cfg = {
+		.uart_enable_bit = 13,
+		.has_7bits_data = false,
+		.fifosize = 1,
+	}
+};
+
+static struct stm32_usart_info stm32f7_info = {
+	.ofs = {
+		.cr1	= 0x00,
+		.cr2	= 0x04,
+		.cr3	= 0x08,
+		.brr	= 0x0c,
+		.gtpr	= 0x10,
+		.rtor	= 0x14,
+		.rqr	= 0x18,
+		.isr	= 0x1c,
+		.icr	= 0x20,
+		.rdr	= 0x24,
+		.tdr	= 0x28,
+	},
+	.cfg = {
+		.uart_enable_bit = 0,
+		.has_7bits_data = true,
+		.has_swap = true,
+		.fifosize = 1,
+	}
+};
+
+static struct stm32_usart_info stm32h7_info = {
+	.ofs = {
+		.cr1	= 0x00,
+		.cr2	= 0x04,
+		.cr3	= 0x08,
+		.brr	= 0x0c,
+		.gtpr	= 0x10,
+		.rtor	= 0x14,
+		.rqr	= 0x18,
+		.isr	= 0x1c,
+		.icr	= 0x20,
+		.rdr	= 0x24,
+		.tdr	= 0x28,
+	},
+	.cfg = {
+		.uart_enable_bit = 0,
+		.has_7bits_data = true,
+		.has_swap = true,
+		.has_wakeup = true,
+		.has_fifo = true,
+		.fifosize = 16,
+	}
+};
+
 static void stm32_usart_stop_tx(struct uart_port *port);
 static void stm32_usart_transmit_chars(struct uart_port *port);
 static void __maybe_unused stm32_usart_console_putchar(struct uart_port *port, unsigned char ch);
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index ee69c203b926..0ec41a732c88 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -38,74 +38,6 @@ struct stm32_usart_info {
 
 #define UNDEF_REG 0xff
 
-/* Register offsets */
-struct stm32_usart_info stm32f4_info = {
-	.ofs = {
-		.isr	= 0x00,
-		.rdr	= 0x04,
-		.tdr	= 0x04,
-		.brr	= 0x08,
-		.cr1	= 0x0c,
-		.cr2	= 0x10,
-		.cr3	= 0x14,
-		.gtpr	= 0x18,
-		.rtor	= UNDEF_REG,
-		.rqr	= UNDEF_REG,
-		.icr	= UNDEF_REG,
-	},
-	.cfg = {
-		.uart_enable_bit = 13,
-		.has_7bits_data = false,
-		.fifosize = 1,
-	}
-};
-
-struct stm32_usart_info stm32f7_info = {
-	.ofs = {
-		.cr1	= 0x00,
-		.cr2	= 0x04,
-		.cr3	= 0x08,
-		.brr	= 0x0c,
-		.gtpr	= 0x10,
-		.rtor	= 0x14,
-		.rqr	= 0x18,
-		.isr	= 0x1c,
-		.icr	= 0x20,
-		.rdr	= 0x24,
-		.tdr	= 0x28,
-	},
-	.cfg = {
-		.uart_enable_bit = 0,
-		.has_7bits_data = true,
-		.has_swap = true,
-		.fifosize = 1,
-	}
-};
-
-struct stm32_usart_info stm32h7_info = {
-	.ofs = {
-		.cr1	= 0x00,
-		.cr2	= 0x04,
-		.cr3	= 0x08,
-		.brr	= 0x0c,
-		.gtpr	= 0x10,
-		.rtor	= 0x14,
-		.rqr	= 0x18,
-		.isr	= 0x1c,
-		.icr	= 0x20,
-		.rdr	= 0x24,
-		.tdr	= 0x28,
-	},
-	.cfg = {
-		.uart_enable_bit = 0,
-		.has_7bits_data = true,
-		.has_swap = true,
-		.has_wakeup = true,
-		.has_fifo = true,
-		.fifosize = 16,
-	}
-};
-
 /* USART_SR (F4) / USART_ISR (F7) */
 #define USART_SR_PE		BIT(0)
 #define USART_SR_FE		BIT(1)
-- 
2.35.1