Re: [PATCH v2 4/5] usb: dwc3: Allow end transfer commands to be sent during soft disconnect

[Wesley Cheng]

Hi Thinh,

On 7/21/2022 3:20 PM, Thinh Nguyen wrote:
> On 7/21/2022, Wesley Cheng wrote:
> > Hi Thinh,
> >
> > On 7/21/2022 3:08 PM, Thinh Nguyen wrote:
> > > Hi Wesley,
> > >
> > > On 7/12/2022, Wesley Cheng wrote:
> > > > If soft disconnect is in progress, allow the endxfer command to be
> > > > sent,
> > > > without this, there is an issue where the stop active transfer call
> > > > (during pullup disable) wouldn't actually issue the endxfer command,
> > > > while clearing the DEP flag.
> > > >
> > > > In addition, if the DWC3_EP_DELAY_STOP flag was set before soft
> > > > disconnect
> > > > started (i.e. from the dequeue path), ensure that when the EP0
> > > > transaction
> > > > completes during soft disconnect, to issue the endxfer with the force
> > > > parameter set, as it does not expect a command complete event.
> > > >
> > > > Fixes: e4cf6580ac740 ("usb: dwc3: gadget: Wait for ep0 xfers to
> > > > complete during dequeue")
> > > > Suggested-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
> > > > Signed-off-by: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
> > > > ---
> > > > Link:
> > > > https://urldefense.com/v3/__https://lore.kernel.org/linux-usb/1a1a5485-790e-79ce-f5a6-1e96d9b49a47@xxxxxxxxxxxx/__;!!A4F2R9G_pg!cXW2TlALYWnXNPg-NoMFUrQ8K1egEZiQizZ5CA1DOM1Gcw4tfOULy-_2eMGvL8pQPte5dScFON-0wxH2eXu8ijEQUbs$
> > > >
> > > >     drivers/usb/dwc3/ep0.c    | 3 +--
> > > >     drivers/usb/dwc3/gadget.c | 5 ++++-
> > > >     2 files changed, 5 insertions(+), 3 deletions(-)
> > > >
> > > > diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
> > > > index 506ef717fdc0..5851b0e9db0a 100644
> > > > --- a/drivers/usb/dwc3/ep0.c
> > > > +++ b/drivers/usb/dwc3/ep0.c
> > > > @@ -290,8 +290,7 @@ void dwc3_ep0_out_start(struct dwc3 *dwc)
> > > >             if (!(dwc3_ep->flags & DWC3_EP_DELAY_STOP))
> > > >                 continue;
> > > >     -        dwc3_ep->flags &= ~DWC3_EP_DELAY_STOP;
> > >
> > > If we don't clear this flag here,
> >
> > This is why I added the dwc->connected argument to control the
> > "interrupt" argument.
> >
> > > > - dwc3_stop_active_transfer(dwc3_ep, true, true);
> > > > +        dwc3_stop_active_transfer(dwc3_ep, true, dwc->connected);
> > > >         }
> > > >     }
> > > >     diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> > > > index ee85b773e3fe..41b7007358de 100644
> > > > --- a/drivers/usb/dwc3/gadget.c
> > > > +++ b/drivers/usb/dwc3/gadget.c
> > > > @@ -1693,6 +1693,7 @@ static int __dwc3_stop_active_transfer(struct
> > > > dwc3_ep *dep, bool force, bool int
> > > >             dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
> > > >         else if (!ret)
> > > >             dep->flags |= DWC3_EP_END_TRANSFER_PENDING;
> > > > +    dep->flags &= ~DWC3_EP_DELAY_STOP;
> > > >            return ret;
> > > >     }
> > > > @@ -3686,8 +3687,10 @@ void dwc3_stop_active_transfer(struct dwc3_ep
> > > > *dep, bool force,
> > > >         if (dep->number <= 1 && dwc->ep0state != EP0_DATA_PHASE)
> > > >             return;
> > > >     +    if (interrupt && (dep->flags & DWC3_EP_DELAY_STOP))
> > > > +        return;
> > > > +
> > >
> > > then it may not go through here. I think I made this same mistake in my
> > > previous suggestion.
> >
> > Since dwc->connected is set to FALSE before we call stop active
> > transfers, if we ever run into a situation where delayed stop is set
> > already, then it should go through.
>
> Then the check for request dequeue that we did previously will not work
> anymore.

Could you help clarify?  The pullup refactor kind of shifted some of the 
previous checks we had in the dequeue path, and combined with with the 
stop active transfer checks.

I think there was an issue w/ the patch I submitted though.  the above 
snippet should be replacing what is there:

void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
	bool interrupt)
{
...
	if (!(dep->flags & DWC3_EP_TRANSFER_STARTED) ||
	    /* Following should be removed --- (dep->flags & 
DWC3_EP_DELAY_STOP) || */
	    (dep->flags & DWC3_EP_END_TRANSFER_PENDING))
		return;

Thanks
Wesley Cheng