Re: [PATCH] arm64: dts: verdin-imx8mm: add otg2 pd to usbphy

[Marcel Ziswiler]

On Fri, 2022-07-22 at 09:55 +0200, Philippe Schenker wrote:
> From: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
> 
> The Verdin iMX8M Mini System on Module does not have VBUS signal
> connected on Verdin USB_2 (usbotg2). On Verdin Development board this is
> no problem, as we have connected a USB-Hub that is always connected.
> 
> However, if Verdin USB_2 is desired to be used as a single USB-Host port
> the chipidea driver does not detect if a USB device is plugged into this
> port, due to runtime pm shutting down the PHY.
> 
> Add the power-domain &pgc_otg2 to &usbphynop2 in order to detect
> plugging events and enumerate the usb device.
> 
> Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
> Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>

Tested-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> # Gumstix Verdin EdgeAi

> ---
> 
>  arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-
> verdin.dtsi
> index eafa88d980b3..197da74837ca 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
> @@ -737,6 +737,7 @@ &usbphynop1 {
>  };
>  
>  &usbphynop2 {
> +       power-domains = <&pgc_otg2>;
>         vcc-supply = <&reg_vdd_3v3>;
>  };