[PATCH] perf: Fix typo 'the the' in comment

[Slark Xiao]

Replace 'the the' with 'the' in the comment.

Signed-off-by: Slark Xiao <slark_xiao@xxxxxxx>
---
 tools/perf/Documentation/perf-diff.txt                        | 2 +-
 tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json | 2 +-
 tools/perf/pmu-events/arch/x86/silvermont/pipeline.json       | 2 +-
 tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json     | 2 +-
 tools/perf/util/cs-etm.c                                      | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index be65bd55ab2a..b77957ac288b 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -285,7 +285,7 @@ If specified the 'Weighted diff' column is displayed with value 'd' computed as:
 
   - period being the hist entry period value
 
-  - WEIGHT-A/WEIGHT-B being user supplied weights in the the '-c' option
+  - WEIGHT-A/WEIGHT-B being user supplied weights in the '-c' option
     behind ':' separator like '-c wdiff:1,2'.
     - WEIGHT-A being the weight of the data file
     - WEIGHT-B being the weight of the baseline data file
diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json b/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json
index aa460d0c4851..59ab88de1b37 100644
--- a/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json
+++ b/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json
@@ -1923,7 +1923,7 @@
         "EventCode": "0x25",
         "EventName": "UNC_UPI_RxL0P_POWER_CYCLES",
         "PerPkg": "1",
-        "PublicDescription": "Counts cycles when the the receive side (Rx) of the Intel Ultra Path Interconnect(UPI) is in L0p power mode. L0p is a mode where we disable 60% of the UPI lanes, decreasing our bandwidth in order to save power.",
+        "PublicDescription": "Counts cycles when the receive side (Rx) of the Intel Ultra Path Interconnect(UPI) is in L0p power mode. L0p is a mode where we disable 60% of the UPI lanes, decreasing our bandwidth in order to save power.",
         "Unit": "UPI LL"
     },
     {
diff --git a/tools/perf/pmu-events/arch/x86/silvermont/pipeline.json b/tools/perf/pmu-events/arch/x86/silvermont/pipeline.json
index 03a4c7f26698..3278c7d1654d 100644
--- a/tools/perf/pmu-events/arch/x86/silvermont/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/silvermont/pipeline.json
@@ -257,7 +257,7 @@
         "Counter": "0,1",
         "EventCode": "0xCA",
         "EventName": "NO_ALLOC_CYCLES.NOT_DELIVERED",
-        "PublicDescription": "The NO_ALLOC_CYCLES.NOT_DELIVERED event is used to measure front-end inefficiencies, i.e. when front-end of the machine is not delivering micro-ops to the back-end and the back-end is not stalled. This event can be used to identify if the machine is truly front-end bound.  When this event occurs, it is an indication that the front-end of the machine is operating at less than its theoretical peak performance.  Background: We can think of the processor pipeline as being divided into 2 broader parts: Front-end and Back-end. Front-end is responsible for fetching the instruction, decoding into micro-ops (uops) in machine understandable format and putting them into a micro-op queue to be consumed by back end. The back-end then takes these micro-ops, allocates the required resources.  When all resources are ready, micro-ops are executed. If the back-end is not ready to accept micro-ops from the front-end, then we do not want to count these as front-end bottlenecks.  However, whenever we have bottlenecks in the back-end, we will have allocation unit stalls and eventually forcing the front-end to wait until the back-end is ready to receive more UOPS. This event counts the cycles only when back-end is requesting more uops and front-end is not able to provide them. Some examples of conditions that cause front-end efficiencies are: Icache misses, ITLB misses, and decoder restrictions that limit the the front-end bandwidth.",
+        "PublicDescription": "The NO_ALLOC_CYCLES.NOT_DELIVERED event is used to measure front-end inefficiencies, i.e. when front-end of the machine is not delivering micro-ops to the back-end and the back-end is not stalled. This event can be used to identify if the machine is truly front-end bound.  When this event occurs, it is an indication that the front-end of the machine is operating at less than its theoretical peak performance.  Background: We can think of the processor pipeline as being divided into 2 broader parts: Front-end and Back-end. Front-end is responsible for fetching the instruction, decoding into micro-ops (uops) in machine understandable format and putting them into a micro-op queue to be consumed by back end. The back-end then takes these micro-ops, allocates the required resources.  When all resources are ready, micro-ops are executed. If the back-end is not ready to accept micro-ops from the front-end, then we do not want to count these as front-end bottlenecks.  However, whenever we have bottlenecks in the back-end, we will have allocation unit stalls and eventually forcing the front-end to wait until the back-end is ready to receive more UOPS. This event counts the cycles only when back-end is requesting more uops and front-end is not able to provide them. Some examples of conditions that cause front-end efficiencies are: Icache misses, ITLB misses, and decoder restrictions that limit the front-end bandwidth.",
         "SampleAfterValue": "200003",
         "UMask": "0x50"
     },
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json b/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json
index aa0f67613c4a..0c96e6924d62 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json
@@ -1852,7 +1852,7 @@
         "EventCode": "0x25",
         "EventName": "UNC_UPI_RxL0P_POWER_CYCLES",
         "PerPkg": "1",
-        "PublicDescription": "Counts cycles when the the receive side (Rx) of the Intel Ultra Path Interconnect(UPI) is in L0p power mode. L0p is a mode where we disable 60% of the UPI lanes, decreasing our bandwidth in order to save power.",
+        "PublicDescription": "Counts cycles when the receive side (Rx) of the Intel Ultra Path Interconnect(UPI) is in L0p power mode. L0p is a mode where we disable 60% of the UPI lanes, decreasing our bandwidth in order to save power.",
         "Unit": "UPI LL"
     },
     {
diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
index 8b95fb3c4d7b..16db965ac995 100644
--- a/tools/perf/util/cs-etm.c
+++ b/tools/perf/util/cs-etm.c
@@ -1451,7 +1451,7 @@ static int cs_etm__sample(struct cs_etm_queue *etmq,
 		 * tidq->packet->instr_count represents the number of
 		 * instructions in the current etm packet.
 		 *
-		 * Period instructions (Pi) contains the the number of
+		 * Period instructions (Pi) contains the number of
 		 * instructions executed after the sample point(n) from the
 		 * previous etm packet.  This will always be less than
 		 * etm->instructions_sample_period.
-- 
2.25.1