Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support

[AngeloGioacchino Del Regno]

Il 22/07/22 12:24, ChiaEn Wu ha scritto:
> From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
>
> The MediaTek MT6370 is a highly-integrated smart power management IC,
> which includes a single cell Li-Ion/Li-Polymer switching battery
> charger, a USB Type-C & Power Delivery (PD) controller, dual
> Flash LED current sources, a RGB LED driver, a backlight WLED driver,
> a display bias driver and a general LDO for portable devices.
>
> In MediaTek MT6370, there are four channel current-sink RGB LEDs that
> support hardware pattern for constant current, PWM, and breath mode.
> Isink4 channel can also be used as a CHG_VIN power good indicator.
>
> Signed-off-by: Alice Chen <alice_chen@xxxxxxxxxxx>
> Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>

> ---
>
> v6
> - Remove the 'ko' from mt6370 led Kconfig description.
> - Add both authors for Alice and ChiYuan.
> - Use pdata to distinguish the code from mt6370/71 to mt6372.
> - Instead of 'state' define, use the 'state' enum.
> - Fix the typo for 'MT6372_PMW_DUTY'.
> - For pwm_duty define, replace with bit macro - 1.
> - Refine all the labels from 'out' to 'out_unlock'.
> - Use struct 'dev' variable and 'dev_err_probe' to optimize the LOC.
> - Revise for the array initialization from {0} to {}.
> - Move into rgb folder and rename file name to 'leds-mt6370-rgb'.
> - Refine the 'comma' usage in struct/enum.
> ---
>   drivers/leds/rgb/Kconfig           |   13 +
>   drivers/leds/rgb/Makefile          |    1 +
>   drivers/leds/rgb/leds-mt6370-rgb.c | 1004 ++++++++++++++++++++++++++++++++++++
>   3 files changed, 1018 insertions(+)
>   create mode 100644 drivers/leds/rgb/leds-mt6370-rgb.c