Re: [PATCH 0/3] Add SFC support for Ingenic SoCs.

[Zhou Yanjie]

Hi Tomasz,

On 2022/7/23 下午10:47, Tomasz Maciej Nowak wrote:
> W dniu 22.07.2022 o 18:48, 周琰杰 (Zhou Yanjie) pisze:
> > 1.Use the spi-mem poll status APIs in SPI-NOR to reduce CPU load.
> > 2.Add SFC support for the X1000 SoC, the X1600 SoC, and the X2000 SoC from Ingenic.
> >
> > Liu Jinghui and Aidan MacDonald provided a lot of assistance during the development of this driver.
> >
> > 周琰杰 (Zhou Yanjie) (3):
> >    mtd: spi-nor: Use the spi-mem poll status APIs.
> >    dt-bindings: SPI: Add Ingenic SFC bindings.
> >    SPI: Ingenic: Add SFC support for Ingenic SoCs.
> >
> >   .../devicetree/bindings/spi/ingenic,sfc.yaml       |  64 ++
> >   drivers/mtd/spi-nor/core.c                         |  42 +-
> >   drivers/spi/Kconfig                                |   9 +
> >   drivers/spi/Makefile                               |   1 +
> >   drivers/spi/spi-ingenic-sfc.c                      | 662 +++++++++++++++++++++
> >   5 files changed, 768 insertions(+), 10 deletions(-)
> >   create mode 100644 Documentation/devicetree/bindings/spi/ingenic,sfc.yaml
> >   create mode 100755 drivers/spi/spi-ingenic-sfc.c
> Even tough it's still early in revision process, I'll add my
> Tested-by: Tomasz Maciej Nowak <tmn505@xxxxxxxxx>
>
> The test was performed with Damai DM6291A SoC which is a Ingenic X1000 IP
> but with 256 MiB RAM. No bugs yet observed on my side.


Thanks for you test!


>