[Patch net-next v2 3/9] net: dsa: microchip: add common duplex and flow control function
From: Arun Ramadoss
Date: Sun Jul 24 2022 - 05:29:44 EST
This patch add common function for configuring the Full/Half duplex and
transmit/receive flow control. KSZ8795 uses the Global control register
4 for configuring the duplex and flow control, whereas all other KSZ9477
based switch uses the xMII Control 0 register.
Signed-off-by: Arun Ramadoss <arun.ramadoss@xxxxxxxxxxxxx>
---
drivers/net/dsa/microchip/ksz9477_reg.h | 1 -
drivers/net/dsa/microchip/ksz_common.c | 36 ++++++++++++++++++++++++
drivers/net/dsa/microchip/ksz_common.h | 15 ++++++++++
drivers/net/dsa/microchip/lan937x_main.c | 25 ++++------------
drivers/net/dsa/microchip/lan937x_reg.h | 3 --
5 files changed, 57 insertions(+), 23 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h
index 2649fdf0bae1..6ca859345932 100644
--- a/drivers/net/dsa/microchip/ksz9477_reg.h
+++ b/drivers/net/dsa/microchip/ksz9477_reg.h
@@ -1178,7 +1178,6 @@
#define REG_PORT_XMII_CTRL_0 0x0300
#define PORT_SGMII_SEL BIT(7)
-#define PORT_MII_FULL_DUPLEX BIT(6)
#define PORT_GRXC_ENABLE BIT(0)
#define REG_PORT_XMII_CTRL_1 0x0301
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 85392d3b1c2b..28c21f5a285f 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -281,11 +281,15 @@ static const u32 ksz8795_masks[] = {
[DYNAMIC_MAC_TABLE_FID] = GENMASK(26, 20),
[DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(26, 24),
[DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(28, 27),
+ [P_MII_TX_FLOW_CTRL] = BIT(5),
+ [P_MII_RX_FLOW_CTRL] = BIT(5),
};
static const u8 ksz8795_xmii_ctrl0[] = {
[P_MII_100MBIT] = 0,
[P_MII_10MBIT] = 1,
+ [P_MII_FULL_DUPLEX] = 0,
+ [P_MII_HALF_DUPLEX] = 1,
};
static const u8 ksz8795_xmii_ctrl1[] = {
@@ -370,6 +374,8 @@ static const u16 ksz9477_regs[] = {
static const u32 ksz9477_masks[] = {
[ALU_STAT_WRITE] = 0,
[ALU_STAT_READ] = 1,
+ [P_MII_TX_FLOW_CTRL] = BIT(5),
+ [P_MII_RX_FLOW_CTRL] = BIT(3),
};
static const u8 ksz9477_shifts[] = {
@@ -379,6 +385,8 @@ static const u8 ksz9477_shifts[] = {
static const u8 ksz9477_xmii_ctrl0[] = {
[P_MII_100MBIT] = 1,
[P_MII_10MBIT] = 0,
+ [P_MII_FULL_DUPLEX] = 1,
+ [P_MII_HALF_DUPLEX] = 0,
};
static const u8 ksz9477_xmii_ctrl1[] = {
@@ -389,6 +397,8 @@ static const u8 ksz9477_xmii_ctrl1[] = {
static const u32 lan937x_masks[] = {
[ALU_STAT_WRITE] = 1,
[ALU_STAT_READ] = 2,
+ [P_MII_TX_FLOW_CTRL] = BIT(5),
+ [P_MII_RX_FLOW_CTRL] = BIT(3),
};
static const u8 lan937x_shifts[] = {
@@ -1468,6 +1478,32 @@ void ksz_port_set_xmii_speed(struct ksz_device *dev, int port, int speed)
ksz_set_100_10mbit(dev, port, speed);
}
+void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex,
+ bool tx_pause, bool rx_pause)
+{
+ const u8 *bitval = dev->info->xmii_ctrl0;
+ const u32 *masks = dev->info->masks;
+ const u16 *regs = dev->info->regs;
+ u8 mask;
+ u8 val;
+
+ mask = P_MII_DUPLEX_M | masks[P_MII_TX_FLOW_CTRL] |
+ masks[P_MII_RX_FLOW_CTRL];
+
+ if (duplex == DUPLEX_FULL)
+ val = FIELD_PREP(P_MII_DUPLEX_M, bitval[P_MII_FULL_DUPLEX]);
+ else
+ val = FIELD_PREP(P_MII_DUPLEX_M, bitval[P_MII_HALF_DUPLEX]);
+
+ if (tx_pause)
+ val |= masks[P_MII_TX_FLOW_CTRL];
+
+ if (rx_pause)
+ val |= masks[P_MII_RX_FLOW_CTRL];
+
+ ksz_prmw8(dev, port, regs[P_XMII_CTRL_0], mask, val);
+}
+
static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface,
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index d87dc88d9f20..3577fa2c5eab 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -197,6 +197,8 @@ enum ksz_masks {
DYNAMIC_MAC_TABLE_TIMESTAMP,
ALU_STAT_WRITE,
ALU_STAT_READ,
+ P_MII_TX_FLOW_CTRL,
+ P_MII_RX_FLOW_CTRL,
};
enum ksz_shifts {
@@ -215,6 +217,8 @@ enum ksz_shifts {
enum ksz_xmii_ctrl0 {
P_MII_100MBIT,
P_MII_10MBIT,
+ P_MII_FULL_DUPLEX,
+ P_MII_HALF_DUPLEX,
};
enum ksz_xmii_ctrl1 {
@@ -310,6 +314,8 @@ void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state);
bool ksz_get_gbit(struct ksz_device *dev, int port);
void ksz_set_gbit(struct ksz_device *dev, int port, bool gbit);
void ksz_port_set_xmii_speed(struct ksz_device *dev, int port, int speed);
+void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex,
+ bool tx_pause, bool rx_pause);
extern const struct ksz_chip_data ksz_switch_chips[];
/* Common register access functions */
@@ -416,6 +422,14 @@ static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset,
ksz_write32(dev, dev->dev_ops->get_port_addr(port, offset), data);
}
+static inline void ksz_prmw8(struct ksz_device *dev, int port, int offset,
+ u8 mask, u8 val)
+{
+ regmap_update_bits(dev->regmap[0],
+ dev->dev_ops->get_port_addr(port, offset),
+ mask, val);
+}
+
static inline void ksz_regmap_lock(void *__mtx)
{
struct mutex *mtx = __mtx;
@@ -474,6 +488,7 @@ static inline int is_lan937x(struct ksz_device *dev)
#define SW_START 0x01
/* xMII configuration */
+#define P_MII_DUPLEX_M BIT(6)
#define P_MII_100MBIT_M BIT(4)
#define P_GMII_1GBIT_M BIT(6)
diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c
index c48bae285758..450ad059d93c 100644
--- a/drivers/net/dsa/microchip/lan937x_main.c
+++ b/drivers/net/dsa/microchip/lan937x_main.c
@@ -234,6 +234,8 @@ int lan937x_reset_switch(struct ksz_device *dev)
void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port)
{
+ const u32 *masks = dev->info->masks;
+ const u16 *regs = dev->info->regs;
struct dsa_switch *ds = dev->ds;
u8 member;
@@ -254,8 +256,9 @@ void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port)
lan937x_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
if (!dev->info->internal_phy[port])
- lan937x_port_cfg(dev, port, REG_PORT_XMII_CTRL_0,
- PORT_MII_TX_FLOW_CTRL | PORT_MII_RX_FLOW_CTRL,
+ lan937x_port_cfg(dev, port, regs[P_XMII_CTRL_0],
+ masks[P_MII_TX_FLOW_CTRL] |
+ masks[P_MII_RX_FLOW_CTRL],
true);
if (cpu_port)
@@ -346,25 +349,9 @@ static void lan937x_config_interface(struct ksz_device *dev, int port,
int speed, int duplex,
bool tx_pause, bool rx_pause)
{
- u8 xmii_ctrl0;
-
ksz_port_set_xmii_speed(dev, port, speed);
- ksz_pread8(dev, port, REG_PORT_XMII_CTRL_0, &xmii_ctrl0);
-
- xmii_ctrl0 &= ~(PORT_MII_FULL_DUPLEX | PORT_MII_TX_FLOW_CTRL |
- PORT_MII_RX_FLOW_CTRL);
-
- if (duplex)
- xmii_ctrl0 |= PORT_MII_FULL_DUPLEX;
-
- if (tx_pause)
- xmii_ctrl0 |= PORT_MII_TX_FLOW_CTRL;
-
- if (rx_pause)
- xmii_ctrl0 |= PORT_MII_RX_FLOW_CTRL;
-
- ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_0, xmii_ctrl0);
+ ksz_duplex_flowctrl(dev, port, duplex, tx_pause, rx_pause);
}
void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
diff --git a/drivers/net/dsa/microchip/lan937x_reg.h b/drivers/net/dsa/microchip/lan937x_reg.h
index b9364f6a4f8f..d5eb6dc3a739 100644
--- a/drivers/net/dsa/microchip/lan937x_reg.h
+++ b/drivers/net/dsa/microchip/lan937x_reg.h
@@ -133,9 +133,6 @@
/* 3 - xMII */
#define REG_PORT_XMII_CTRL_0 0x0300
#define PORT_SGMII_SEL BIT(7)
-#define PORT_MII_FULL_DUPLEX BIT(6)
-#define PORT_MII_TX_FLOW_CTRL BIT(5)
-#define PORT_MII_RX_FLOW_CTRL BIT(3)
#define PORT_GRXC_ENABLE BIT(0)
#define REG_PORT_XMII_CTRL_1 0x0301
--
2.36.1