Re: [PATCH 1/2] hwmon: Add pwmX_fan_channel attribute

[Armin Wolf]

Am 24.07.22 um 16:44 schrieb Guenter Roeck:

> On 7/23/22 18:20, Armin Wolf wrote:
> > Am 23.07.22 um 16:17 schrieb Guenter Roeck:
> >
> > > On Sat, Jul 23, 2022 at 05:38:19AM +0200, Armin Wolf wrote:
> > > > Until now, userspace software needs to guess which
> > > > PWM channel is associated with which fan channel by
> > > > probing each PWM output and watch for fan speed changes.
> > > > This proccess is error-prone and unreliable.
> > > >
> > > > Some hwmon chips, especially firmware-based ones, already
> > > > know which PWM output is associated with which fan channel.
> > > >
> > > > Allow such chips to export this knowledge to userspace.
> > > >
> > > > Signed-off-by: Armin Wolf <W_Armin@xxxxxx>
> > > All of the chips I am aware of have a fixed association from pwm
> > > channel
> > > output to fan input. None I am aware of make this association
> > > configurable.
> > > I do not see the value of this attribute.
> > >
> > > Guenter
> >
> > That is true, the association from pwm channel output to fan input is
> > usually fixed.
> > However not all chips are able to discover which pwm channel output
> > is associated with
> > which fan channel. For example most superio-based chips cannot know
> > how the motherboard
> > manufacturer wired the fans, and thus userspace relies on pwmconfig
> > for manually probing
> > each pwm channel.
>
> Alternatively, the user can figure it out based on board documentation
> and configure it directly. That is how it is. That doesn't mean that
> it makes
> sense to 'store' that information in a sysfs attribute. That is not
> what hwmon
> sysfs attributes are supposed to be used for.
Good point.
It would be indeed better if userspace software like pwmconfig would
use an internal list containing the names of all hwmon chips for which
the pwm to fan mappings are known.
I will add a note to the documentation of dell-smm-hwmon about the
pwm to fan mapping so userspace software knows about this.
Sorry for bothering you.

Armin Wolf

> > In contrast, many firmware-based chips do know which pwm channel
> > output controls which
> > fan channel. One example might be the dell-smm-hwmon driver and the
> > gpio-fan driver.
> >
> > In this case, making the attribute RO would indeed make sense.
>
> Unless the attribute is used to configure the chip, it does not make
> sense
> in the first place. Also note that gpio-fan is usually configured using
> devicetree properties, _and_ it only has a single set of fan/pwm
> properties,
> so a sysfs attribute would always return 1 and make make even less
> sense there.
>
> Guenter
>
> > Armin Wolf
> >
> > > > ---
> > > >   Documentation/ABI/testing/sysfs-class-hwmon | 8 ++++++++
> > > >   Documentation/hwmon/sysfs-interface.rst     | 3 +++
> > > >   drivers/hwmon/hwmon.c                       | 1 +
> > > >   include/linux/hwmon.h                       | 2 ++
> > > >   4 files changed, 14 insertions(+)
> > > >
> > > > diff --git a/Documentation/ABI/testing/sysfs-class-hwmon
> > > > b/Documentation/ABI/testing/sysfs-class-hwmon
> > > > index 7271781a23b2..f3d653bcf736 100644
> > > > --- a/Documentation/ABI/testing/sysfs-class-hwmon
> > > > +++ b/Documentation/ABI/testing/sysfs-class-hwmon
> > > > @@ -315,6 +315,14 @@ Description:
> > > >
> > > >           RW
> > > >
> > > > +What:        /sys/class/hwmon/hwmonX/pwmY_fan_channel
> > > > +Description:
> > > > +        Select which fan channel is controlled by this PWM output.
> > > > +
> > > > +        Valid fan channel/PWM output combinations are chip-dependent.
> > > > +
> > > > +        RW
> > > > +
> > > >   What: /sys/class/hwmon/hwmonX/pwmY_auto_channels_temp
> > > >   Description:
> > > >           Select which temperature channels affect this PWM output in
> > > > diff --git a/Documentation/hwmon/sysfs-interface.rst
> > > > b/Documentation/hwmon/sysfs-interface.rst
> > > > index 209626fb2405..17fcec03d3c5 100644
> > > > --- a/Documentation/hwmon/sysfs-interface.rst
> > > > +++ b/Documentation/hwmon/sysfs-interface.rst
> > > > @@ -209,6 +209,9 @@ PWM
> > > >   `pwm[1-*]_freq`
> > > >           Base PWM frequency in Hz.
> > > >
> > > > +`pwm[1-*]_fan_channel`
> > > > +                Select which fan channel is controlled by this PWM
> > > > output.
> > > > +
> > > >   `pwm[1-*]_auto_channels_temp`
> > > >           Select which temperature channels affect this PWM output in
> > > >           auto mode.
> > > > diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
> > > > index 2e2cd79d89eb..8c2d7574c461 100644
> > > > --- a/drivers/hwmon/hwmon.c
> > > > +++ b/drivers/hwmon/hwmon.c
> > > > @@ -604,6 +604,7 @@ static const char * const
> > > > hwmon_pwm_attr_templates[] = {
> > > >       [hwmon_pwm_enable] = "pwm%d_enable",
> > > >       [hwmon_pwm_mode] = "pwm%d_mode",
> > > >       [hwmon_pwm_freq] = "pwm%d_freq",
> > > > +    [hwmon_pwm_fan_channel] = "pwm%d_fan_channel",
> > > >       [hwmon_pwm_auto_channels_temp] = "pwm%d_auto_channels_temp",
> > > >   };
> > > >
> > > > diff --git a/include/linux/hwmon.h b/include/linux/hwmon.h
> > > > index 14325f93c6b2..9d40cc1e520f 100644
> > > > --- a/include/linux/hwmon.h
> > > > +++ b/include/linux/hwmon.h
> > > > @@ -332,6 +332,7 @@ enum hwmon_pwm_attributes {
> > > >       hwmon_pwm_enable,
> > > >       hwmon_pwm_mode,
> > > >       hwmon_pwm_freq,
> > > > +    hwmon_pwm_fan_channel,
> > > >       hwmon_pwm_auto_channels_temp,
> > > >   };
> > > >
> > > > @@ -339,6 +340,7 @@ enum hwmon_pwm_attributes {
> > > >   #define HWMON_PWM_ENABLE        BIT(hwmon_pwm_enable)
> > > >   #define HWMON_PWM_MODE            BIT(hwmon_pwm_mode)
> > > >   #define HWMON_PWM_FREQ            BIT(hwmon_pwm_freq)
> > > > +#define HWMON_PWM_FAN_CHANNEL BIT(hwmon_pwm_fan_channel)
> > > >   #define HWMON_PWM_AUTO_CHANNELS_TEMP
> > > > BIT(hwmon_pwm_auto_channels_temp)
> > > >
> > > >   enum hwmon_intrusion_attributes {
> > > > --
> > > > 2.30.2