[PATCH v3 10/11] net: phy: aquantia: Add some additional phy interfaces
From: Sean Anderson
Date: Mon Jul 25 2022 - 11:39:58 EST
These are documented in the AQR115 register reference. I haven't tested
them, but perhaps they'll be useful to someone.
Signed-off-by: Sean Anderson <sean.anderson@xxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
---
Changes in v3:
- Move unused defines to next commit (where they will be used)
drivers/net/phy/aquantia_main.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia_main.c
index 8b7a46db30e0..b3a5db487e52 100644
--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -27,9 +27,12 @@
#define MDIO_PHYXS_VEND_IF_STATUS 0xe812
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK GENMASK(7, 3)
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR 0
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX 1
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI 2
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII 3
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI 4
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII 6
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI 7
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII 10
#define MDIO_AN_VEND_PROV 0xc400
@@ -392,15 +395,24 @@ static int aqr107_read_status(struct phy_device *phydev)
case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR:
phydev->interface = PHY_INTERFACE_MODE_10GKR;
break;
+ case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX:
+ phydev->interface = PHY_INTERFACE_MODE_1000BASEKX;
+ break;
case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:
phydev->interface = PHY_INTERFACE_MODE_10GBASER;
break;
case MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII:
phydev->interface = PHY_INTERFACE_MODE_USXGMII;
break;
+ case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI:
+ phydev->interface = PHY_INTERFACE_MODE_XAUI;
+ break;
case MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII:
phydev->interface = PHY_INTERFACE_MODE_SGMII;
break;
+ case MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI:
+ phydev->interface = PHY_INTERFACE_MODE_RXAUI;
+ break;
case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII:
phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
break;
@@ -513,11 +525,14 @@ static int aqr107_config_init(struct phy_device *phydev)
/* Check that the PHY interface type is compatible */
if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
+ phydev->interface != PHY_INTERFACE_MODE_1000BASEKX &&
phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
phydev->interface != PHY_INTERFACE_MODE_XGMII &&
phydev->interface != PHY_INTERFACE_MODE_USXGMII &&
phydev->interface != PHY_INTERFACE_MODE_10GKR &&
- phydev->interface != PHY_INTERFACE_MODE_10GBASER)
+ phydev->interface != PHY_INTERFACE_MODE_10GBASER &&
+ phydev->interface != PHY_INTERFACE_MODE_XAUI &&
+ phydev->interface != PHY_INTERFACE_MODE_RXAUI)
return -ENODEV;
WARN(phydev->interface == PHY_INTERFACE_MODE_XGMII,
--
2.35.1.1320.gc452695387.dirty