[PATCH v2 03/11] DONOTMERGE: arm64: dts: ti: k3-am642-sk: Enable tps65219 power-button

[Jerome Neanne]

From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>

This board uses the pin as a power-button, enable it.

Needed for driver testing but official board support pending.
TI commitment is required before board upstream kick-off.

Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
Signed-off-by: Jerome Neanne <jneanne@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/ti/k3-am642-sk.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 7a84223406f5..d789fb7c2162 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -348,8 +348,7 @@
 		pinctrl-0 = <&pmic_irq_pins_default>;
 		interrupt-parent = <&gic500>;
 		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
+		power-button;
 
 		buck1-supply = <&vcc_3v3_sys>;
 		buck2-supply = <&vcc_3v3_sys>;
-- 
2.17.1