Re: [PATCH v3 00/24] dmaengine: dw-edma: Add RP/EP local DMA controllers support

[Serge Semin]

On Thu, Jul 21, 2022 at 05:46:10PM +0530, Vinod Koul wrote:
> On 10-06-22, 12:14, Serge Semin wrote:
> > This is a final patchset in the series created in the framework of
> > my Baikal-T1 PCIe/eDMA-related work:
> > 
> > [1: In-progress v4] PCI: dwc: Various fixes and cleanups
> > Link: https://lore.kernel.org/linux-pci/20220610082535.12802-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/
> > [2: In-progress v3] PCI: dwc: Add hw version and dma-ranges support
> > Link: https://lore.kernel.org/linux-pci/20220610084444.14549-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/
> > [3: In-progress v3] PCI: dwc: Add generic resources and Baikal-T1 support
> > Link: https://lore.kernel.org/linux-pci/20220610085706.15741-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/
> > [4: In-progress v3] dmaengine: dw-edma: Add RP/EP local DMA support
> > Link: ---you are looking at it---
> > 
> > Note it is very recommended to merge the patchsets in the same order as
> > they are listed in the set above in order to have them applied smoothly.
> > Nothing prevents them from being reviewed synchronously though.
> > 
> > Please note originally this series was self content, but due to Frank
> > being a bit faster in his work submission I had to rebase my patchset onto
> > his one. So now this patchset turns to be dependent on the Frank' work:
> > 
> > Link: https://lore.kernel.org/linux-pci/20220524152159.2370739-1-Frank.Li@xxxxxxx/
> > 
> > So please merge Frank' series first before applying this one.
> > 
> > Here is a short summary regarding this patchset. The series starts with
> > fixes patches. We discovered that the dw-edma-pcie.c driver incorrectly
> > initializes the LL/DT base addresses for the platforms with not matching
> > CPU and PCIe memory spaces. It is fixed by using the pci_bus_address()
> > method to get a correct base address. After that you can find a series of
> > the interleaved xfers fixes. It turned out the interleaved transfers
> > implementation didn't work quite correctly from the very beginning for
> > instance missing src/dst addresses initialization, etc. In the framework
> > of the next two patches we suggest to add a new platform-specific
> > callback - pci_address() and use it to convert the CPU address to the PCIe
> > space address. It is at least required for the DW eDMA remote End-point
> > setup on the platforms with not-matching CPU/PCIe address spaces. In case
> > of the DW eDMA local RP/EP setup the conversion will be done automatically
> > by the outbound iATU (if no DMA-bypass flag is specified for the
> > corresponding iATU window). Then we introduce a set of the patches to make
> > the DebugFS part of the code supporting the multi-eDMA controllers
> > platforms. It starts with several cleanup patches and is closed joining
> > the Read/Write channels into a single DMA-device as they originally should
> > have been. After that you can find the patches with adding the non-atomic
> > io-64 methods usage, dropping DT-region descriptors allocation, replacing
> > chip IDs with the device name. In addition to that in order to have the
> > eDMA embedded into the DW PCIe RP/EP supported we need to bypass the
> > dma-ranges-based memory ranges mapping since in case of the root port DT
> > node it's applicable for the peripheral PCIe devices only. Finally at the
> > series closure we introduce a generic DW eDMA controller support being
> > available in the DW PCIe Root Port/Endpoint driver.
> 

> Acked-By: Vinod Koul <vkoul@xxxxxxxxxx>

Thanks, Vinod! The series will be merged in after the patchset
[PATCH vX 00/17] PCI: dwc: Add generic resources and Baikal-T1 support
Link: https://lore.kernel.org/linux-pci/20220610085706.15741-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/
is done with Rob' review (I failed to reach him with a few issues
lately). I'll add your ab-tag to this one on the next patchset re-spin
(rebase will be likely needed).

-Sergey

> 
> -- 
> ~Vinod