[PATCH v2 06/11] soc: qcom: icc-bwmon: store count unit per variant
From: Krzysztof Kozlowski
Date: Thu Jul 28 2022 - 07:38:28 EST
Versions v4 and v5 of BWMON on SDM845 use different unit count, so allow
easier variant customization by storing its value in struct
icc_bwmon_data.
Cc: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
Cc: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
---
drivers/soc/qcom/icc-bwmon.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/soc/qcom/icc-bwmon.c b/drivers/soc/qcom/icc-bwmon.c
index d2df8feff651..7fd0e41c63e6 100644
--- a/drivers/soc/qcom/icc-bwmon.c
+++ b/drivers/soc/qcom/icc-bwmon.c
@@ -103,12 +103,11 @@
#define BWMON_THRESHOLD_COUNT_ZONE0_DEFAULT 0xff
#define BWMON_THRESHOLD_COUNT_ZONE2_DEFAULT 0xff
-/* BWMONv4 count registers use count unit of 64 kB */
-#define BWMON_COUNT_UNIT_KB 64
#define BWMON_ZONE_MAX(zone) (0x2e0 + 4 * (zone))
struct icc_bwmon_data {
unsigned int sample_ms;
+ unsigned int count_unit_kb; /* kbytes */
unsigned int default_highbw_kbps;
unsigned int default_medbw_kbps;
unsigned int default_lowbw_kbps;
@@ -192,9 +191,10 @@ static void bwmon_enable(struct icc_bwmon *bwmon, unsigned int irq_enable)
writel(BWMON_ENABLE_ENABLE, bwmon->base + BWMON_ENABLE);
}
-static unsigned int bwmon_kbps_to_count(unsigned int kbps)
+static unsigned int bwmon_kbps_to_count(struct icc_bwmon *bwmon,
+ unsigned int kbps)
{
- return kbps / BWMON_COUNT_UNIT_KB;
+ return kbps / bwmon->data->count_unit_kb;
}
static void bwmon_set_threshold(struct icc_bwmon *bwmon, unsigned int reg,
@@ -202,8 +202,8 @@ static void bwmon_set_threshold(struct icc_bwmon *bwmon, unsigned int reg,
{
unsigned int thres;
- thres = mult_frac(bwmon_kbps_to_count(kbps), bwmon->data->sample_ms,
- MSEC_PER_SEC);
+ thres = mult_frac(bwmon_kbps_to_count(bwmon, kbps),
+ bwmon->data->sample_ms, MSEC_PER_SEC);
writel_relaxed(thres, bwmon->base + reg);
}
@@ -269,7 +269,7 @@ static irqreturn_t bwmon_intr(int irq, void *dev_id)
* downstream) always increments the max bytes count by one.
*/
max = readl(bwmon->base + BWMON_ZONE_MAX(zone)) + 1;
- max *= BWMON_COUNT_UNIT_KB;
+ max *= bwmon->data->count_unit_kb;
bwmon->target_kbps = mult_frac(max, MSEC_PER_SEC, bwmon->data->sample_ms);
return IRQ_WAKE_THREAD;
@@ -393,6 +393,7 @@ static int bwmon_remove(struct platform_device *pdev)
/* BWMON v4 */
static const struct icc_bwmon_data msm8998_bwmon_data = {
.sample_ms = 4,
+ .count_unit_kb = 64,
.default_highbw_kbps = 4800 * 1024, /* 4.8 GBps */
.default_medbw_kbps = 512 * 1024, /* 512 MBps */
.default_lowbw_kbps = 0,
--
2.34.1