Re: [PATCH v2 1/2] dt-binding: iio: time: add capture-tiecap.yaml

[Krzysztof Kozlowski]

On 28/07/2022 14:52, Julien Panis wrote:
> This commit adds a YAML binding for TI ECAP used in capture operating mode.
> 
> Signed-off-by: Julien Panis <jpanis@xxxxxxxxxxxx>
> ---
>  .../bindings/iio/time/capture-tiecap.yaml     | 68 +++++++++++++++++++
>  1 file changed, 68 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/time/capture-tiecap.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/time/capture-tiecap.yaml b/Documentation/devicetree/bindings/iio/time/capture-tiecap.yaml
> new file mode 100644
> index 000000000000..5d66df90ba5d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/time/capture-tiecap.yaml
> @@ -0,0 +1,68 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/time/capture-tiecap.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#

Still wrong file name.

Do not ignore comments you received. Either you implement them or you
keep the discussion going.


> +
> +title: Texas Instruments Enhanced Capture (eCAP) Module
> +
> +maintainers:
> +  - Julien Panis <jpanis@xxxxxxxxxxxx>
> +

(...)

> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/soc/ti,sci_pm_domain.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        bus@f0000 {
> +            compatible = "simple-bus";
> +            #address-cells = <2>;
> +            #size-cells = <2>;
> +            ranges = <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>;

A bit too many nodes. Just keep one, bus or soc. Look at other examples.


Best regards,
Krzysztof