Re: [PATCH v5, 0/8] Support H264 multi-core encoder on MT8195

[Nicolas Dufresne]

Hi Irui,

Le vendredi 29 juillet 2022 à 11:51 +0800, Irui Wang a écrit :
> MT8195 has two H264 encoder hardware, named core0 and core1, this two
> cores can encode two input frames separately at the same time to achieve
> higher performance.

I suspect you could provide some performance numbers on that specific HW before
and after your change ? This could help integrator regarding what type of gain
they can expect of back-porting this feature. This is not strictly mandatory
though.

> 
> This series of patches are used to enable the two H264 encoder cores,
> the difference between encoding process before and after enable two
> cores is just like as below:
> As-Is: Synchronous
> V4L2_VIDIOC_QBUF#0 --> device_run(triger encoder) --> wait encoder IRQ
> -->
> encoding done with result --> job_finish
> V4l2_VIDIOC_QBUF#1 --> device_run(triger encoder) --> wait encoder IRQ
> -->
> encoding done with result --> job_finish
> ...
> To-Be: Asynchronous
> V4L2_VIDIOC_QBUF#0 --> device_run(triger encoder) --> job_finish
> ..V4l2_VIDIOC_QBUF#1 --> device_run(triger encoder) --> job_finish
> (venc core0 may encode done here, done the encoding result to client)
> V4L2_VIDIOC_QBUF#2 --> device_run(triger encoder) --> job_finish.
> 
> ---
> changes compared with v4:
> - reabse to the newer linux media stage tree.
> - remove "mediatek,venc-multi-core" property since sub-device can
>   be probed by of_platform_populate api directly.
> - some modifications for patch v4's review comments.
> 
> changes compared with v3:
> - rebase to the newer linux media stage.
> - add a capability to indicate scp firmware support multi-core.
> - probe core0 as main device, core1 as sub-device.
> 
> changes compared with v2:
> - update venc core dt-bindings, add two new properties for current
>   usage.
> - parse venc multi_core mode from device tree.
> - rebase to the newer linux media stage.
> 
> changes compared with v1:
> - of_platform_populate was used in place of the component framework.
> - new yaml file for venc cores.
> - some modifications for patch v1's review comments.
> ---
> 
> Irui Wang (8):
>   dt-bindings: media: mediatek: vcodec: Adds encoder cores dt-bindings
>     for mt8195
>   media: mediatek: vcodec: Enable venc dual core usage
>   media: mediatek: vcodec: Refactor venc power manage function
>   media: mediatek: vcodec: Add more extra processing for multi-core
>     encoding
>   media: mediatek: vcodec: Add venc power on/off function
>   media: mediatek: vcodec: Refactor encoder clock on/off function
>   media: mediatek: vcodec: Add multi-core encoding process
>   media: mediatek: vcodec: Return encoding result in asynchronous mode
> 
>  .../media/mediatek,vcodec-encoder-core.yaml   | 218 ++++++++++++++++
>  .../media/mediatek,vcodec-encoder.yaml        |   1 -
>  .../media/platform/mediatek/vcodec/Makefile   |   4 +-
>  .../platform/mediatek/vcodec/mtk_vcodec_drv.h |  28 +-
>  .../platform/mediatek/vcodec/mtk_vcodec_enc.c | 113 ++++++--
>  .../platform/mediatek/vcodec/mtk_vcodec_enc.h |  11 +-
>  .../mediatek/vcodec/mtk_vcodec_enc_drv.c      |  44 +++-
>  .../mediatek/vcodec/mtk_vcodec_enc_hw.c       | 156 +++++++++++
>  .../mediatek/vcodec/mtk_vcodec_enc_hw.h       |  34 +++
>  .../mediatek/vcodec/mtk_vcodec_enc_pm.c       | 178 +++++++++++--
>  .../mediatek/vcodec/mtk_vcodec_enc_pm.h       |  11 +-
>  .../mediatek/vcodec/mtk_vcodec_util.c         |  19 ++
>  .../mediatek/vcodec/mtk_vcodec_util.h         |   3 +
>  .../mediatek/vcodec/venc/venc_h264_if.c       | 243 ++++++++++++++----
>  .../mediatek/vcodec/venc/venc_vp8_if.c        |   3 +-
>  .../platform/mediatek/vcodec/venc_drv_if.c    |  75 ++++--
>  .../platform/mediatek/vcodec/venc_drv_if.h    |   6 +
>  .../platform/mediatek/vcodec/venc_vpu_if.c    |   9 +-
>  .../platform/mediatek/vcodec/venc_vpu_if.h    |   3 +-
>  19 files changed, 1028 insertions(+), 131 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-encoder-core.yaml
>  create mode 100644 drivers/media/platform/mediatek/vcodec/mtk_vcodec_enc_hw.c
>  create mode 100644 drivers/media/platform/mediatek/vcodec/mtk_vcodec_enc_hw.h
>