Re: [RESEND PATCH v6 2/3] leds: Add driver for the TLC5925 LED controller

[Pavel Machek]

Hi!

> The TLC5925 is a 16-channels constant-current LED sink driver.
> It is controlled via SPI but doesn't offer a register-based interface.
> Instead it contains a shift register and latches that convert the
> serial input into a parallel output.
> 
> Datasheet: https://www.ti.com/lit/ds/symlink/tlc5925.pdf
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> ---
>  drivers/leds/Kconfig        |   6 ++
>  drivers/leds/Makefile       |   1 +
>  drivers/leds/leds-tlc5925.c | 148 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 155 insertions(+)

Lets make this go to drivers/leds/simple/ ?


> +	gpios = devm_gpiod_get_array(dev, "output-enable-b", GPIOD_OUT_LOW);
> +	if (IS_ERR(gpios))
> +		return dev_err_probe(dev, PTR_ERR(gpios),
> +			      "Unable to get the 'output-enable-b' gpios\n");
> +
> +	count = device_get_child_node_count(dev);
> +	if (!count)
> +		return dev_err_probe(dev, -ENODEV, "no led defined.\n");

"No LED..."

> +	device_property_read_u32(dev, "ti,shift-register-length",
> +				 &max_num_leds);
> +
> +	if (max_num_leds % 8)
> +		return dev_err_probe(dev, -EINVAL,
> +				     "'ti,shift-register-length' must be a multiple of 8\n");
> +	if (max_num_leds == 0)
> +		return dev_err_probe(dev, -EINVAL,
> +				     "'ti,shift-register-length' must be greater than 0\n");
> +

I thought you had #define for leds number before?

Otherwise looks good, thank you.

Best regards,
								Pavel
-- 
People of Russia, stop Putin before his war on Ukraine escalates.

Attachment: signature.asc
Description: PGP signature