[PATCH v2] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins
From: Krzysztof Kozlowski
Date: Fri Aug 05 2022 - 03:55:29 EST
BMG160 has two interrupt pins to which interrupts can be freely mapped.
Correct the schema to express such case and fix warnings like:
qcom/msm8916-alcatel-idol347.dtb: gyroscope@68: interrupts: [[97, 1], [98, 1]] is too long
However the basic issue still persists - the interrupts should come in a
defined order.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
Changes since v1:
1. Accept also INT2 as one interrupt (Jonathan).
---
.../devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
index b6bbc312a7cf..1414ba9977c1 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
@@ -24,8 +24,10 @@ properties:
interrupts:
minItems: 1
+ maxItems: 2
description:
Should be configured with type IRQ_TYPE_EDGE_RISING.
+ If two interrupts are provided, expected order is INT1 and INT2.
required:
- compatible
--
2.34.1